Posts: 159
Threads: 22
Joined: Feb 2015
Reputation:
0
(28-Jul-2015, 20:39)ZincAlloy Wrote: (28-Jul-2015, 13:28)JConfused Wrote: Oh well ..... After endless weeks of firmware and configuration swapping I was finally happy with 8.1.3 (non beta). But you evil lot have set me thinking that maybe I should give 8.1.3beta a go, with my current 4GB card encoded configurations. To be honest though, I really have had enough of SD card swapping and critical listening, plus all this has genuinely sent me bonkers. I will probably end up trying this, but I think I will leave to mid August at least. We'll probably have 8.1.5 or something by then anyway....... 8.1.3 is too hot, with the result that I've had to use tone controls for the first time to dial down the treble. SAM is also unusable on my Akurates - weird, very boomy, hollow sounding bass - so I've switched it off.
I could contact Devialet and ask them to investigate, but I'm with you, Confused. I couldn't be bothered getting another firmware version which will inevitably be superseded within a few weeks. Getting equally fed up with all this palaver. Rant over.
ATB, Ken
I guess I could understand where some systems could result in the 8.1.3 beta FW (and by extension 8.1.3 official release) sounding too bright. That is definitely not where my system is/was sitting sonically.
Kerry
Laufer Teknik Memory Player - Atlas Mavros S/PDIF x 2 - Mutec MC-3+ USB Reclocker - Sablon Panatella BNC-SPDIF Digital Cable - LampizatOr Big 7 Tube DAC
Ayre Acoustics AX5-Twenty Amplifier - Rockport Technologies Cygnus Loudspeakers - Rel Gibralter G1 Six Pack Subs - Siltech Princess XLR - Ear to Ear Cables and PCs - Canada
Posts: 73
Threads: 7
Joined: May 2014
Reputation:
1
(29-Jul-2015, 19:40)GuillaumeB Wrote: (29-Jul-2015, 19:38)Divasson Wrote: 7.1.3 is for me the best firmware yet.
Did you try the 8.1.3 beta?
Guillaume
Guillaume, no, I didn't. i don't have it. I will PM you about it.
I found the difference between 8.1.3 (normal release) and 7.1.3 bigger than I expected in terms not so much of quality but of sound signature. And again, on dark or subdued speakers, 8.1.3 (normal) may be better for some listeners. But 7.1.3 "clicked" with my Gallos.
Someone said it better before: 8.x.x is excellent, high-end hifi. 7.1.3 sounds more like the real thing. Much less impressive, yes. But real. Were I a reviewer, I would have written a substantially different comment in both cases. (Both positive: reviewers never post a negative review!)
If the beta 8.1.3 is able to keep the naturalness of 7.1.3, then it'll be difficult to improve upon!
Oslo: sources: Mac Mini/Itunes/Audirvana, glassfiber toslink/Mapleshade clearview USB to D200;
Double helix to Gallo Strada 2 with mapleshade stands, TR3 subwoofer.
Spain: Oppo 95 vacuumstate modded, Kimber select 1021, Linn Classik Movie Di to Gallo Solos through Goertz Python cable
Posts: 159
Threads: 22
Joined: Feb 2015
Reputation:
0
29-Jul-2015, 21:06
(This post was last modified: 29-Jul-2015, 21:08 by MusicFirst.)
(29-Jul-2015, 20:34)Confused Wrote: (29-Jul-2015, 18:51)MusicFirst Wrote: Confused
The boominess is centered around 100 hz. The response centred around 40hz is pretty flat.
Kerry
That's interesting. To be honest I'm looking for trends, however, my issues were at the very very lowest frequencies, at about 100 Hz SAM is doing next to nothing. I'm starting to think that SAM 2 issues are speaker specific, if there are trends they are quite well hidden.
Confused
I am hearing the slight boominess in the acoustic/electric bass, so there are frequencies between 40-100 hz in this instrument. Definite SAM territory, and easy to correct with a slight dial back.
Laufer Teknik Memory Player - Atlas Mavros S/PDIF x 2 - Mutec MC-3+ USB Reclocker - Sablon Panatella BNC-SPDIF Digital Cable - LampizatOr Big 7 Tube DAC
Ayre Acoustics AX5-Twenty Amplifier - Rockport Technologies Cygnus Loudspeakers - Rel Gibralter G1 Six Pack Subs - Siltech Princess XLR - Ear to Ear Cables and PCs - Canada
Posts: 48
Threads: 6
Joined: Dec 2014
Reputation:
1
Οbserving the files of both versions 8.1.3 beta and 8.1.3 i find that is exactly the files are the same. How can the sound quality change?Is there something that skips my attention??
Posts: 581
Threads: 4
Joined: May 2014
Reputation:
20
the files are not the same. The ihm_800.hex file of the beta is about 1200 bytes smaller. Only the names are the same.
Posts: 48
Threads: 6
Joined: Dec 2014
Reputation:
1
Now I see it. You have right.Thank you very much for the information!!!
Posts: 159
Threads: 22
Joined: Feb 2015
Reputation:
0
(29-Jul-2015, 22:35)Vivialet Wrote: the files are not the same. The ihm_800.hex file of the beta is about 1200 bytes smaller. Only the names are the same.
anyone know what the heck the ihm_800.hex file does?
Laufer Teknik Memory Player - Atlas Mavros S/PDIF x 2 - Mutec MC-3+ USB Reclocker - Sablon Panatella BNC-SPDIF Digital Cable - LampizatOr Big 7 Tube DAC
Ayre Acoustics AX5-Twenty Amplifier - Rockport Technologies Cygnus Loudspeakers - Rel Gibralter G1 Six Pack Subs - Siltech Princess XLR - Ear to Ear Cables and PCs - Canada
Posts: 433
Threads: 44
Joined: Apr 2015
Reputation:
6
I know next to nothing about this sorta thing but thought this might be worth checking out as a key to understanding the hex dilemma. If worthless please pardon the attempt.
http://download.cnet.com/HxD-Hex-Editor/...91068.html
Statements in my posts are opinion only, not to be construed as fact. Any projects I engage in are at my own risk! Their outcome cannot be assured and may result in success, small/no change or catastrophic failure. I encourage no one rely on anything I say or do as gospel and to realize your mileage may vary!
Posts: 1,035
Threads: 59
Joined: Mar 2015
Reputation:
12
Thanks, Rufus, for sharing. Downloaded it and loaded onto my D200. Enjoying now.
Before: Le200, KEF LS50, AQ Type4, NUC 5i5RYH/8GB/128GB M.2SSD, Roon, Win8.1/AIR2.1.3/RoonBridge, MM/AIR3/RoonBridge, QNAP TS-212P 5TB NAS, AQ NRG-X3
Now: KEF LS50W, NUC5i5RYH/8GB/128GB M.2SSD, Roon, QNAP TS-212P 5TB NAS,iFi iSilencer3.0+DC iPurifier+iPurifier2, Sonos ZP80+SPDIF iPurifier
Location: Cyberjaya, Malaysia
Posts: 185
Threads: 18
Joined: Jan 2015
Reputation:
2
(30-Jul-2015, 02:45)hk6230 Wrote: Thanks, Rufus, for sharing. Downloaded it and loaded onto my D200. Enjoying now.
did you use the same configuration files as for the official 8.1.3?
D400; Stereolab Tombo Tron coaxial for master -> slave; Kubala-Sosna Elation interconnects, power, and speaker cables; Spendor D7 speakers; Bryston BDP-2 w. latest sound card & upgraded fuses; Bybee Stealth Power Purifier conditioner connected with IsoTek EVO3 Syncro SE to wall socket
|