Posts: 44
Threads: 6
Joined: Apr 2019
Reputation:
0
Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
Posts: 52
Threads: 4
Joined: Apr 2020
Reputation:
3
(25-Apr-2020, 18:10)mingfang Wrote: (25-Apr-2020, 17:50)Yar36 Wrote: Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
For my home theater system, I use two silvers for the fronts and a 900 as the center.
All three are configured for optical and driven by my Denon receiver via RCA to optical converters.
They are running DOS2 so the minimum latency is 60ms.
If you don't have any regular speakers then you won't notice any latency problems with the video.
I have a regular sub and surrounds, and occasionally the latency do cause an echo effect.
When it happens it's very annoying.
Devialet - if you're listening please bring back optical direct to DOS2.
To balance the volume differences between the silvers and the 900, in my Denon's speaker level settings I set the 900 to be +9.5.
Zidoo z9x 미디어 플레이어 + Shield pro-> onkyo sc5530 프로세서-> rme adi2 fs (3ea)-> 광 케이블-> Devialet golds 3 (FL, FR, C) + silvers 2 (RR, RL) / 150 인치, Optoma Hoz60 .5ch.
Posts: 52
Threads: 4
Joined: Apr 2020
Reputation:
3
Hi. Mr.
I have a question for you. If you are using two silver and one 900 on the front, can you control the volume of two silver and one 900 with the app at the same time?
Zidoo z9x 미디어 플레이어 + Shield pro-> onkyo sc5530 프로세서-> rme adi2 fs (3ea)-> 광 케이블-> Devialet golds 3 (FL, FR, C) + silvers 2 (RR, RL) / 150 인치, Optoma Hoz60 .5ch.
Posts: 28
Threads: 2
Joined: Jan 2020
Reputation:
5
I set all three speakers' volume to 70 and then use my Denon receiver to control the volume.
The downside is the speakers are always on and at 70; I can hear a hiss at 6" away but not when I'm sitting on my sofa.
Posts: 79
Threads: 8
Joined: Nov 2015
Reputation:
3
You can run reactors and classics together in 2.10 update. Didn't hear any sync issues.
Sent from my LM-V450 using Tapatalk
Posts: 278
Threads: 17
Joined: Aug 2016
Reputation:
31
(25-Apr-2020, 17:50)Yar36 Wrote: Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
I have 3 golds and 2 reactor 900s in my HT. In order for me to get them in sync I had to apply a 120ms delay to the Golds. I'm running my setup in "Optical Direct/Custom Install mode" and am using Dante adapters to get the signal from my Anthem receiver to the Phantoms.
6 x Phantom Gold, 3 x Phantom Silver, 2 x Phantom Classic, 9 x Phantom Reactor 900, Symetrix Radius AEC-2, 2 x JBL Synthesis SDP-55, Dante