Problems with Core Infinity

[petrik]

Just received my two D220Pro back from Devialet, had one working since Saturday and decided to install the other today, both on the same network but different ip addresses listed in Roon, the problem is when one is playing if I try to start play on the other one I get ‘device in use’. I can only clear this by pulling the plug and exiting Roon however whichever device I try to start up second then has the same issue ‘device in use’. Has anyone else had this issue and or resolved it?

Do you have DHCP enabled? I had a similar problem but I got it resolved by disabling the DHCP and defining a fixed IP to the Devialet.

[Dannythered]

Just received my two D220Pro back from Devialet, had one working since Saturday and decided to install the other today, both on the same network but different ip addresses listed in Roon, the problem is when one is playing if I try to start play on the other one I get ‘device in use’. I can only clear this by pulling the plug and exiting Roon however whichever device I try to start up second then has the same issue ‘device in use’. Has anyone else had this issue and or resolved it?

Do you have DHCP enabled? I had a similar problem but I got it resolved by disabling the DHCP and defining a fixed IP to the Devialet.

Roon core is on a Mac mini, where do I enable DHCP? And how and where do I define a fixed IP to the Devialet?
Just checked and network settings says using DHCP

[petrik]

Just received my two D220Pro back from Devialet, had one working since Saturday and decided to install the other today, both on the same network but different ip addresses listed in Roon, the problem is when one is playing if I try to start play on the other one I get ‘device in use’. I can only clear this by pulling the plug and exiting Roon however whichever device I try to start up second then has the same issue ‘device in use’. Has anyone else had this issue and or resolved it?

Do you have DHCP enabled? I had a similar problem but I got it resolved by disabling the DHCP and defining a fixed IP to the Devialet.

Roon core is on a Mac mini, where do I enable DHCP? And how and where do I define a fixed IP to the Devialet?
Just checked and network settings says using DHCP

You can disable the DHCP and give a fixed IP address to the Devialet in the Configurator. I haven't got this 'device in use' error after doing this change.
https://www.devialet.com/en-eu/configurator/advanced

[Dannythered]

Do you have DHCP enabled? I had a similar problem but I got it resolved by disabling the DHCP and defining a fixed IP to the Devialet.

Roon core is on a Mac mini, where do I enable DHCP? And how and where do I define a fixed IP to the Devialet?
Just checked and network settings says using DHCP

You can disable the DHCP and give a fixed IP address to the Devialet in the Configurator. I haven't got this 'device in use' error after doing this change.
https://www.devialet.com/en-eu/configurator/advanced

Many thanks, I'll give that a go

[Rama]

After the CI upgrade: Hearing pops and clicks via USB (Melco N1A ---> the SMS-200 Ultra ---> Devialet 440 pro). Also cant seem to make UPnP work via the Melco LAN player port, using either Kinsky or Kazoo.

Just a follow up: UPnP is now working was just a question of using a different control point software, in my case Jriver Media centre works perfectly. One small firmware bug: (UPnP input display lettering remains red and does not change its colour to white when operational). I am not going to be using USB for now till the issue of pops and clicks is resolved by Devialet. Forgetting for a movement the pops and clicks, the sound quality via USB is better than the Melco LAN connection. Moving on, the Phono input is working perfectly and sounds exceptional.

[Dannythered]

Roon core is on a Mac mini, where do I enable DHCP? And how and where do I define a fixed IP to the Devialet?
Just checked and network settings says using DHCP

You can disable the DHCP and give a fixed IP address to the Devialet in the Configurator. I haven't got this 'device in use' error after doing this change.
https://www.devialet.com/en-eu/configurator/advanced

Many thanks, I'll give that a go

No joy, still same issue, strangely the new IP addresses I set up didn't show up in Roon, just the original ones, did I do something wrong? Also tidal disappeared as did my Roon account, couldn't connect to either

[petrik]

You can disable the DHCP and give a fixed IP address to the Devialet in the Configurator. I haven't got this 'device in use' error after doing this change.
https://www.devialet.com/en-eu/configurator/advanced

Many thanks, I'll give that a go

No joy, still same issue, strangely the new IP addresses I set up didn't show up in Roon, just the original ones, did I do something wrong? Also tidal disappeared as did my Roon account, couldn't connect to either

It sounds like you are having some problems on the network/configuration. I would suggest double checking that you have configured a valid IP address for your Devialet.

I have the new IP address shown correctly on Roon. Also Tidal works fine with Roon.

[markush]

New beta is public https://help.devialet.com/hc/en-us/artic...ember-12th

[petrik]

New beta is public https://help.devialet.com/hc/en-us/artic...ember-12th

I wish I could say some words about this release but I don't want to break any rules
https://devialetchat.com/showthread.php?...3#pid69643

[Celts88]

New beta is public https://help.devialet.com/hc/en-us/artic...ember-12th

New beta is public https://help.devialet.com/hc/en-us/artic...ember-12th

I wish I could say some words about this release but I don't want to break any rules
https://devialetchat.com/showthread.php?...3#pid69643

New Beta is public, but talking about it is private