Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problems with Core Infinity
I just got mine back and there is no reaction to the remote. Completely not functional so I can not even check what software etc is loaded. Can only use the power button so switch between sources and on/off.
P.S.:
After 30min the remote decided to work (i just left it untouched)
Reply
Mine did the same thing. Hopefully you wont also get the dreaded "Transport" error.
SYSTEM 1:Grimm MU-1 running Roon Server & Ready//Grimm TPM//GRIMM LS1be
SYSTEM 2: Antipodes DX Roon Server// MiniDSP// Grimm TPM// Dutch & Dutch 8C

Reply
(18-Dec-2017, 21:32)AaronG Wrote: Mine did the same thing. Hopefully you want also get the dreaded "Transport" error.

I have been getting the error: Transport: Roon lost control of the audio device because the input was switched.
Have you found a work around? I’ve tried everything apart from deleting a Roon from my Mac, which is a major step. Nothing so far has worked.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control.  Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp.Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable,  Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Reply
@Axel If no solution is forthcoming I would suggest posting on ROON forum, and see perhaps if they request some log files to troubleshoot the issue.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
Reply
On the Roon Forum they say that a solution is nearly at hand, although I'll believe it when I see/hear it. I've given up for the moment.

(19-Dec-2017, 00:30)Axel Wrote:
(18-Dec-2017, 21:32)AaronG Wrote: Mine did the same thing. Hopefully you want also get the dreaded "Transport" error.

I have been getting the error: Transport: Roon lost control of the audio device because the input was switched.
Have you found a work around? I’ve tried everything apart from deleting a Roon from my Mac, which is a major step. Nothing so far has worked.
SYSTEM 1:Grimm MU-1 running Roon Server & Ready//Grimm TPM//GRIMM LS1be
SYSTEM 2: Antipodes DX Roon Server// MiniDSP// Grimm TPM// Dutch & Dutch 8C

Reply
Thanks for your replies. Is this a Roon problem? Mine was fine until I started changing the firmware versions, using the version that we are not allowed to talk about, and then changing back to Devialet OS 2.2, which in my book makes this a CI problem and pertinent to this thread. @baddog, thanks, I will post on the Roon forum and see what they come up with. @AaronG, what steps have you tried to get around this problem? I’m going to be pretty hacked off if this means that I can’t use Roon to access my high res. library.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control.  Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp.Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable,  Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Reply
I wish I could assist more, however I am without my D440 until they are (hopefully) returned later this week. Best of luck for a speedy resolution.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
Reply
(19-Dec-2017, 00:30)Axel Wrote:
(18-Dec-2017, 21:32)AaronG Wrote: Mine did the same thing. Hopefully you want also get the dreaded "Transport" error.

I have been getting the error: Transport: Roon lost control of the audio device because the input was switched.
Have you found a work around? I’ve tried everything apart from deleting a Roon from my Mac, which is a major step. Nothing so far has worked.

Pull out the power cord and plug it back in and it works again. Everything else fails.
I've had this error too but now has been gone for a longer period.
Devialet 220 Expert Pro CI | Sonus Faber Olympica II | Crystal cable speaker cables, interlink and power cables | ROON Rock on Intel NUC | Netherlands
Reply
Unplugging the Devialet for a minute and then restarting gets rid of the error for a while, but it always comes back within an hour or two. I'm just streaming with Spotify at the moment since I find it annoying to have the music interrupted and restart continually. I wish there was a work around!

(19-Dec-2017, 07:27)Axel Wrote: Thanks for your replies. Is this a Roon problem? Mine was fine until I started changing the firmware versions, using the version that we are not allowed to talk about, and then changing back to Devialet OS 2.2, which in my book makes this a CI problem and pertinent to this thread. @baddog, thanks, I will post on the Roon forum and see what they come up with. @AaronG, what steps have you tried to get around this problem? I’m going to be pretty hacked off if this means that I can’t use Roon to access my high res. library.
SYSTEM 1:Grimm MU-1 running Roon Server & Ready//Grimm TPM//GRIMM LS1be
SYSTEM 2: Antipodes DX Roon Server// MiniDSP// Grimm TPM// Dutch & Dutch 8C

Reply
I have the Roon trial running on an iMac streaming via Air without any problems so far, though I rarely stream for as long as 2 hours continuously. Just listening to Mahler 3 at the moment which is quite long and almost finished without glitch.
I mainly listen to CDs though.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)