Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The best upnp setting
#1
Hi !

Just received my upgraded D.

I did use usb before.

Now i would like to stream locally through upnp.

As a beginning, i start with daphile with dsd and upnp plugin.
Will try alter gentooplayer and minimserver.

As i am not a great audio technician, i was wondering which best setting would be to take the maximum advantage of D specifications.

Here is a screenshot of the current set. But There are so many things i do not have any single idea…


Attached Files Thumbnail(s)
       
Alim PC Reddo Audio/HDPlex 400W Hifi.
Serveur HDPLex DIY (Daphile upnp).
ClearAudio Émotion (DL103) - JCT Neith.
D250 EP - MPC Mélodie - Atlantis Acoustique Argentera.

Mibox 4. Benq 1070 - Visivo Lusso.
Reply
#2
MinimServer + BubbleUPnP
Devialet Expert 440 Pro | Dynaudio Confidence 50 | 2x SVS SB16-Ultra
Anthem MRX 720 | Dynaudio Excite X28 | Dynaudio Emit M20
LG OLED 77 CX | LG OLED 65 C7






Reply
#3
Hi !

Yes it is one of my targets.
Just want to spend Time with daphile to wake my ears up.

Gentoo+minim is considered too…
Alim PC Reddo Audio/HDPlex 400W Hifi.
Serveur HDPLex DIY (Daphile upnp).
ClearAudio Émotion (DL103) - JCT Neith.
D250 EP - MPC Mélodie - Atlantis Acoustique Argentera.

Mibox 4. Benq 1070 - Visivo Lusso.
Reply
#4
(25-Feb-2023, 17:01)Fredouille40 Wrote: Hi !

Yes it is one of my targets.
Just want to spend Time with daphile to wake my ears up.

Gentoo+minim is considered too…
I also use Gentooplayer(v8 with a specific Realtime kernel) as an endpoint for Euphony. Euphony is connected to Gentooplayer endpoint by using UPNP.

I prefered MPD with UpmpdCli on Gentooplayer(Directly run on RAM). And I run Euphony Stylus v4 (loaded and runing onon RAM).

You can give higher priority for these processes on gentooplayer as shown in the pictures below 

   
   
   
   
Stereo Setup: Synology DS214Play NAS/Internet sources>> Supra CAT8 >> Ubiquiti Edge10X Switch>> Fiberoptical Cable >> SOTM SNH-10G Switch(S-Booster LPS) >> Supra CAT8 >> Euphony v4(Stylus with Qobuz, Tidal) running on RAM >> SOTM SNH-10G >> Supra CAT8 >> Mercury Streamer (GentooPlayer, MPD+UpMpdCli  running on RAM) + Fiio PL50 LPS >>  Mogami Gold AES XLR >> Devialet 220 Pro >> Echole Omnia Speaker/Jumper Cables >> B&W 804D3 Speakers on IsoAcoustics GAIA-II

Headphone Setup: Synology DS214Play NAS(CAT8) >> Ubiquiti Edge10X Switch>> Fiberoptical Cable >> SOTM SNH-10G Switch(S-Booster LPS) >> Supra CAT8 >> Euphony v4( Stylus with Qobuz, Tidal) running on RAM >> SOTM SNH-10G >> Supra CAT8 >>  Mercury Streamer(GentooPlayer , Mpd/UpMpdCli ) + Fiio PL50 LPS >>  RCA Coax >> Chord Hugo >> Fostex TH900 MK2
Reply
#5
Wouaww ! Thanks for the infos.

I am sticked and worried on a power supply of m’y server.

New regulated power supply, new ac/dc converter… it burned and smocked Wheeler i swiched on !!!

Grrrrrr !

I will revert to you as soon as the problem is solved…
Alim PC Reddo Audio/HDPlex 400W Hifi.
Serveur HDPLex DIY (Daphile upnp).
ClearAudio Émotion (DL103) - JCT Neith.
D250 EP - MPC Mélodie - Atlantis Acoustique Argentera.

Mibox 4. Benq 1070 - Visivo Lusso.
Reply
#6
So the music server si burnt…

I will build a new one based on supermicro motherboard (Intel inside), apacer ram, jact lan card, ingeneered card…

Will be ready within feu months…

Meantime i tried Spotify, uggly.
Amazon music, with an old laptop… much better…

Ripping the discotheque again (as i lost it with no backup, grrrr). And revert to Daphile on the old laptop… will see later for gentoo.
Alim PC Reddo Audio/HDPlex 400W Hifi.
Serveur HDPLex DIY (Daphile upnp).
ClearAudio Émotion (DL103) - JCT Neith.
D250 EP - MPC Mélodie - Atlantis Acoustique Argentera.

Mibox 4. Benq 1070 - Visivo Lusso.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)