Posts: 54
Threads: 8
Joined: Nov 2015
Reputation:
0
I am running my 220 with a Yamaha AVR for front left & right duty, but the level is very low when using the line bypass input set at 0db. I have turned the input sensitivity down to 1.7mv...do you think this will be ok and not clip the input? or should I just increase the the bypass level, perhaps up to +2db?
Any advise please?
Thanks
Mark
Dev 220 Pro/ATC scm40/Sony9000es/Roon/Mac Mini/Anthem 720 AVR/ATC C1 Center/M&k Tri-Pols/Sony U800/Sony 65A1
Posts: 508
Threads: 1
Joined: Nov 2014
Reputation:
9
I think you should check your Yamaha AVR's manual or contact Yamaha's support, they should be able to tell you what is the maximum output level from your Yamaha's preouts. You should enter that (or a slightly higher) value to your Devialet configuration.
I have set the pass through volume to -15 dB and it's working fine with my Marantz AVR. I guess 0 dB should be fine as well.
Bluesound Node > Matrix Audio X-SPDIF 2 > Genelec 8351B & 7360A
Devialet 1000 Pro
Bluesound Node 2i > Genelec 8330
Tampere, Finland
Posts: 54
Threads: 8
Joined: Nov 2015
Reputation:
0
(12-Jul-2017, 17:03)petrik Wrote: I think you should check your Yamaha AVR's manual or contact Yamaha's support, they should be able to tell you what is the maximum output level from your Yamaha's preouts. You should enter that (or a slightly higher) value to your Devialet configuration.
I have set the pass through volume to -15 dB and it's working fine with my Marantz AVR. I guess 0 dB should be fine as well.
Hmm, at -15db I have virtually no output. At 0db its ok but I have to turn up the levels of all the other channels to +10 on the AVR. With the sensitivity at 1.7mv and the gain at 0db all is normal and sounds great, but I dont want to be clipping the input as it could damage my speakers. I will check with Yamaha.
Thanks.
Dev 220 Pro/ATC scm40/Sony9000es/Roon/Mac Mini/Anthem 720 AVR/ATC C1 Center/M&k Tri-Pols/Sony U800/Sony 65A1
Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
The display dots are orange to tell you that input levels are high and red when you are clipping.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Posts: 54
Threads: 8
Joined: Nov 2015
Reputation:
0
(12-Jul-2017, 21:25)Jean-Marie Wrote: (12-Jul-2017, 17:08)jukemark Wrote: (12-Jul-2017, 17:03)petrik Wrote: I think you should check your Yamaha AVR's manual or contact Yamaha's support, they should be able to tell you what is the maximum output level from your Yamaha's preouts. You should enter that (or a slightly higher) value to your Devialet configuration.
I have set the pass through volume to -15 dB and it's working fine with my Marantz AVR. I guess 0 dB should be fine as well.
Hmm, at -15db I have virtually no output. At 0db its ok but I have to turn up the levels of all the other channels to +10 on the AVR. With the sensitivity at 1.7mv and the gain at 0db all is normal and sounds great, but I dont want to be clipping the input as it could damage my speakers. I will check with Yamaha.
Thanks.
To know if you are clipping, you can look at the screen of the Devialet or the remote app. If the input flashes orange or red (I never know which color it is) it means you are clipping and should adjust accordingly.
Ah brilliant, didnt know that. Thank you.
Dev 220 Pro/ATC scm40/Sony9000es/Roon/Mac Mini/Anthem 720 AVR/ATC C1 Center/M&k Tri-Pols/Sony U800/Sony 65A1