Am i missing something in my setup to get gapless ?
220 Pro with the CI board, running the latest FW fed via a Melco N1A. Using A&K app to drive things. I notice the CI board in UPnP mode loads the whole track for playback so i take it that there is some interaction between the Dev and Melco missing to start loading the next track before the previous is completed to allow gapless ?
Thanks Rufus. I assumed that those settings only applied when using the Melco with a USB DAC (as i used to use it before the CI board). Put it into Hybrid mode but no difference unfortunately
Ah, that's annoying. Worth trying mode 1 just in case but sounds like that's not it. Perhaps try a different app to see whether it's app-related? I tend to use boring old Linn Kinsky which should work OK in mode 1. You're using the UPNP server on the Melco right? Is it the inbuilt Twonky server?
Hmm - thanks both. I was in mode 1 (used to use Kinsky when using USB but that would only play 1 track at a time when using UPnP) so it should have worked. I'll have a further play...
(18-Jun-2018, 21:22)james n Wrote: Hmm - thanks both. I was in mode 1 (used to use Kinsky when using USB but that would only play 1 track at a time when using UPnP) so it should have worked. I'll have a further play...
Thanks again
James
Hello James, Kinsky or Kazoo (both upnp open home) do not work with upnp streaming, stops for a title. It works with AK 2.0 app!
(19-Jun-2018, 22:28)james n Wrote: Just one other thought - what format is your music in. I'm using ALAC which makes me wonder if that's got something to do with my gapless issue ?
I could rule that out by converting one of the albums back to AIFF and see if that sorts the problem out (not that that is a good long term solution)