Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remote dont connect
#1
Just removed the battery lock and dont connect

remove the batteries and nothing...  Confused
Reply
#2
Try some fresh batteries. The ones that came with my remote were useless.
Reply
#3
I had trouble the first time. Changed batteries, still the same. Did a full reset and then worked fine and has done ever since. Might be a silly question, but I assume you are holding it inverted above the Phantom to connect it?
Reply
#4
Checklist.
1. Make sure batteries are the correct way round.
2. Turn remote upside down and see if a tiny blue LED lights up.
3. Hold remote upside down just above the centre of the Phantom for about 5 secs until its little wings move out.
4. When trying to adjust the volume check to see if the blue LED flashes 4 times. This means its not linked to the Phantom.
5. Open Spark app and see if the volume changes when you turn the dial on the remote.
Synology DS215 NAS (2x WD RED 1Tb) > Virgin Superhub 3 > HP Pavilion X360 laptop > Phantom Reactor 600 > JRiver MC25 > JRemote > A&K AK70mkii DAP > Supra Cat8 Ethernet cable > Sony WH-1000XM4 > jar of cream v2
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)