Posts: 106
Threads: 7
Joined: Nov 2014
Reputation:
2
Hi all,
By accident really I touched the companion and was suprised that it was quite warm as the 1000 pro had been off since yesterday evening. The master on the other hand was cold. Connection is via AES/EBU.
Any idea's?
Cheers,
Bill.
Devialet 1000pro C1. Aurender N10 Wilson Benesch A.C.T. ONE Evolution P1 Naim headline Naim highcap Sennheiser HD 800 Naim Super Lumina speaker cable. Shunyata Delta EF mains cables. 2 PSI AVAA C20 active acoustic absorbers.
Posts: 106
Threads: 7
Joined: Nov 2014
Reputation:
2
Hi Baddog,
I leave my 1000pro in standby, I would have thought both units would be warm not just the companion!
cheers
Bill.
Devialet 1000pro C1. Aurender N10 Wilson Benesch A.C.T. ONE Evolution P1 Naim headline Naim highcap Sennheiser HD 800 Naim Super Lumina speaker cable. Shunyata Delta EF mains cables. 2 PSI AVAA C20 active acoustic absorbers.
Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
30-Jul-2017, 03:09
(This post was last modified: 30-Jul-2017, 03:10 by Axel.)
My Companion is slightly warm to the touch, while the Master is cold. The amps are turned off i.e. screens not illuminated and are not linked with a trigger cable.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Posts: 4,303
Threads: 129
Joined: Jun 2014
Reputation:
174
Hi Bill, my 1000 Pro has been on standby through the night. Checking it now by touch (via white glove!) the companion does feel noticeably warm but the master does not. If you hold your hand on the master for a few seconds, you can feel it is slightly warm also, it is just not as immediately noticeable as it is with the companion.
Firing the beast up from standby the temps read master 32/30/34, companion 35/35/40. It is interesting to note that after start up, the temps rise very quickly, a couple of degrees within the first minute.
1000 Pro - KEF Blade - iFi Zen Stream - Mutec REF10 - MC3+USB - Pro-Ject Signature 12
Posts: 106
Threads: 7
Joined: Nov 2014
Reputation:
2
Hi Axel and Confused,
Very many thanks for your input, it is most reassuring that you both find your companions are also warm.
The quote from Devialet recognising this as well really puts my mind at ease.
Cheers lots, Dev chat strikes again.
Bill.
Devialet 1000pro C1. Aurender N10 Wilson Benesch A.C.T. ONE Evolution P1 Naim headline Naim highcap Sennheiser HD 800 Naim Super Lumina speaker cable. Shunyata Delta EF mains cables. 2 PSI AVAA C20 active acoustic absorbers.
Posts: 903
Threads: 11
Joined: Jul 2015
Reputation:
39
I'd be very interested to hear from anyone that is using a trigger cable as to how it may be affecting temps. Other than allowing the companion to accept inputs, is there any other benefit to using a trigger cable? I am not since I don't need any more inputs, but now I'm wondering...
Devialet 440 Pro (two 220s)- Oracle CD transport - Kuzma Stabi S/Stogi S turntable - Von Schweikert VR-35 speakers - JPS SC3 SCs - PI Audio power conditioning -
Triode Wire Labs ICs and PCs - Roon on NUC 8i7beh running ROCK
Durham, NC USA
Posts: 964
Threads: 10
Joined: Jul 2015
Reputation:
15
I could swear that someone posted on here that using the Trigger cable with a dual mono setup lowered the temperature of the companion when in stand by. However as this only works if one uses a S/PDIF to S/PDIF connection between the two units, and I use a S/PDIF to AES cable between the the two units, I have not tried this.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US