Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
phantom reactor setup problem
#1
Video 
hello.  i bought from the internet a Devialet Phantom Reactor 900. when i turn on the led blinking 7,8 time and then stops, no sound, no solid light , nothing. I cant conect.
I try to reset but again, non response from devialet speaker. 
what is the reason why?
thank you
i attach a video
Reply
#2
Depends on the colour of the LED.

INDICATOR LIGHT

White
Flashing: Phantom Reactor is booting up.
Solid: Phantom Reactor is on and ready for use.

Green
Flashing: Phantom Reactor is preparing for set up / set up has already commenced.
Solid: Phantom Reactor is on and ready for setup.

Blue
Flashing slowly: Bluetooth pairing mode enabled. Flashes twice: Bluetooth connection successful.

Orange
Flashing: Network connection lost.
Solid: Thermal protection mode on. Please unplug and wait for Phantom Reactor to cool down.

Violet
Solid: Phantom Reactor is performing a factory reset.
Synology DS215 NAS (2x WD RED 1Tb) > Virgin Superhub 3 > HP Pavilion X360 laptop > Phantom Reactor 600 > JRiver MC25 > JRemote > A&K AK70mkii DAP > Supra Cat8 Ethernet cable > Sony WH-1000XM4 > jar of cream v2
Reply
#3
after 7 led blinkind the led it s off, no colour, no any light.
Reply
#4
The LED that is blinking 7 times must have a colour or white
Synology DS215 NAS (2x WD RED 1Tb) > Virgin Superhub 3 > HP Pavilion X360 laptop > Phantom Reactor 600 > JRiver MC25 > JRemote > A&K AK70mkii DAP > Supra Cat8 Ethernet cable > Sony WH-1000XM4 > jar of cream v2
Reply
#5
(21-Mar-2020, 20:35)Silvertouran Wrote: The LED that is blinking 7 times must have a colour or white
white
Reply
#6
its white
Reply
#7
afther 7 white blinking the led is off, no colour
Reply
#8
(15-Apr-2020, 15:06)adyion Wrote: afther 7 white blinking the led is off, no colour

For reseting dialog was used method plug and unplug power more then 5 time
Try connect reactor to internet by wire and plug power 5s wait unplug power 5s wait, 5 - 7 times repeat and you se if led bliking purple red
Reply
#9
(16-Apr-2020, 12:17)jvoki Wrote:
(15-Apr-2020, 15:06)adyion Wrote: afther 7 white blinking the led is off, no colour

For reseting dialog was used method plug and unplug power more then 5 time
Try connect reactor to internet by wire and plug power 5s wait unplug power 5s wait, 5 - 7 times repeat and you se if led bliking purple red
sorry. SAME!!!led blinking white color 7 time, after that stop blinking and that it s.
no reaction when try to reset, no reaction when try what you says.
does anyone needs service procedure ever? I want to send at devialet service but there is no official service in my country. anyway i dont have warranty for it.
Reply
#10
Have you contacted Devialet Support? It does not matter if it is out of warranty.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)