Devialet Chat

(24-Dec-2017, 19:16)agentsmith Wrote: [ -> ]My Devialet with Core Infinity upgrade is bricked after I upgraded to the latest Roon MacOS Version 1.4 Build 94.

It keeps giving me "Devise in Use" and refuses to play.  I used to be able to restart Roon but now restarting everything including rebooting the Roon Server makes no difference.

(11-Dec-2017, 11:32)PeterS Wrote: [ -> ]After I powered up my D250 I thought "what is this?" It sounded awful, but after 10-15 minutes it got better and is now great again. I can't tell if there is a difference with the new board. There may be some more mid-band clarity as others have mentioned but it is not more involving.

USB and Air over Ethernet work. WiFi doesn't work; I have the same configuration as before but the D250 is not visible in the list of attached devices.
I don't know how to get UPNP working. My NAS doesn't recognize the D250 over the network. Is UPNP only available over USB, or should it work over Ethernet/WiFi too? The manual that came with the new software doesn't say anything about that.

1. Remove the SD Card ( this step I bypassed, and it corrected the WiFi issue with out resetting it back to factory}
   
   
2. Long press on the tone button of the remote
   
   
3. 6x short press on the tone button to acces the menu "Information"
   
   
4. Long press on the front button of the Amplifier
   
   
5. Reput the SD Card
   
   
6. Unplug / replug the power cord - Wifi or Ethernet will reappear.
   

(26-Dec-2017, 02:35)woodstock Wrote: [ -> ]Now that I have had the new core infinity for over a weak more or less running 24/7 much like my work these days, I've been finally able to realise the sound I was expecting when I first went for the core up grade. For those who had followed my ordeal, I was some what disappointed at first and with a whole new loom of cabling and a change of speakers from the Galo Ref.3 to Hyperion 968s came to a place where I could except it, but still there was always this longing for an aspect of the old expert heritage, which was that holographic image of the guy wailing away on whatever. The electronics that were producing the music were not there anymore. I did lean to love the new pro, I really enjoyed the new sound stage layering but in doing so I was loosing that in the room with you that I loved so much. The bass on the Hyperions can be difficult to control but was greatly improve with the pro incarnation but still had a hint of bloom, but with the core infinity right out of the box,the bloom was gone, just tight , articulate pulsating bass. Now this is what I was expecting. Pure bliss. Oh one other thing, it really helps you appreciate the Devialet sound if like myself  you go from a Rogue 150 or an original Bel Canto Evo to this.
 Less is More.

(26-Dec-2017, 01:25)woodstock Wrote: [ -> ]

(11-Dec-2017, 11:32)PeterS Wrote: [ -> ]After I powered up my D250 I thought "what is this?" It sounded awful, but after 10-15 minutes it got better and is now great again. I can't tell if there is a difference with the new board. There may be some more mid-band clarity as others have mentioned but it is not more involving.

USB and Air over Ethernet work. WiFi doesn't work; I have the same configuration as before but the D250 is not visible in the list of attached devices.
I don't know how to get UPNP working. My NAS doesn't recognize the D250 over the network. Is UPNP only available over USB, or should it work over Ethernet/WiFi too? The manual that came with the new software doesn't say anything about that.

These were the instructions Devialet support passed on to me also there has been some small changes to the configurator, so double check just make sure you have it right.
Please follow these steps to trouble shoot WIfi and Eth

Reset of the config

1. Remove the SD Card  ( this step I bypassed, and it corrected the WiFi issue with out resetting it back to factory}
   
   
2. Long press on the tone button of the remote
   
   
3. 6x short press on the tone button to acces the menu "Information"
   
   
4. Long press on the front button of the Amplifier
   
   
5. Reput the SD Card
   
   
6. Unplug / replug the power cord - Wifi or Ethernet will reappear.