27-Apr-2015, 19:40
Well it seems that it's most likely an Aries issue. The Aries has a rather low signal level on it's Spdif output..
Auralic says: "Output level of ARIES S/PDIF is around 0.4V which is below average level but according to the S/PDIF standard via COAX the minimum acceptable input level at receiver side should be able to accept 0.2V.
So there really is no fix it's not a firmware issue but a hardware issue..
Auralic says: "Output level of ARIES S/PDIF is around 0.4V which is below average level but according to the S/PDIF standard via COAX the minimum acceptable input level at receiver side should be able to accept 0.2V.
So there really is no fix it's not a firmware issue but a hardware issue..