Upgrading to Devialet app release v11.1.1

[Anders]

Running v11.1.1 on Android.

I use 2 Ethernet cables, connected individually to each phantom.  Every night, I shutdown the Phantoms before I switch off the mains.  When I started them up, both came up and they remained a stereo pair.

For the past few days, I lent my ER Ethernet switch to some friends.  I then used Ethernet to 1 phantom and the second connected via PLC.  On powering up, the left phantom connected via Ethernet, but the right phantom started up (got the startup sound) but Devialet App reported the right speaker as missing!  Had to add the right phantom using the App and redid the stereo pairing.  It happened every time I started system.

There is definitely a problem with "discovery" of a Phantom not connected by Ethernet cable. Cannot say anything about v1.11.0 because I was always using 2 Ethernet cables.  @massi.rav , @kantblue - what are using to connect the Phantoms?  And have either of you reported problem to Devialet?

J

ust my experience so far - using DOS 2.10.0 and Ipad v1.11.1 (1 1023), ethernet cable connected to the right speaker and letting the router find the left on wifi (Router = Synology 2600ac). No problems at all - I turn both speakers off when not in use - turn them on with the main switch - no problems at all to start listening. The remote device is working much better using DOS2. As reported before I have set the max volume to 60% in the web page of the two speakers.
I do not doubt your problems - just want to share my experience , might add to the total picture.
Regards and hope you solve your problems.
/Anders