@Axel - many thanks for that. You post annoyed me a little, nothing personal of course, it is just that I have some similar devices to yourself, and in one case identical. So why does the app work for you and not work for me? Also, I do have some very strange behaviour, the app works in terms of the source selection doing what it should, but the volume control does not work or sync with the physical remote.
Suitably inspired by annoyance, time for some trouble shooting.
Hard reset on the amps. - still the same.
Reloaded the app on a IOS device known to work previously. - still the same.
Tried a different ethernet cable to the Devialet. - still the same.
Took the Ethernet feed to the Devialet direct from the router, which in my case bypasses the A side of an EtherRegen and a conventional switch. - This worked!
OK - I now have a very long ethernet cable running across the room and in front of a door, which is no good.
Replaced everything back exactly as it was, no changes whatsoever. - It now works fine on all devices.
Go figure!
Suitably inspired by annoyance, time for some trouble shooting.
Hard reset on the amps. - still the same.
Reloaded the app on a IOS device known to work previously. - still the same.
Tried a different ethernet cable to the Devialet. - still the same.
Took the Ethernet feed to the Devialet direct from the router, which in my case bypasses the A side of an EtherRegen and a conventional switch. - This worked!
OK - I now have a very long ethernet cable running across the room and in front of a door, which is no good.
Replaced everything back exactly as it was, no changes whatsoever. - It now works fine on all devices.
Go figure!
1000 Pro - KEF Blade - iFi Zen Stream - Mutec REF10 - MC3+USB - Pro-Ject Signature 12
