15-Jul-2017, 05:28
After you make the FLASH drive you do the following:
Turn off your NUC.
Unplug any USB storage you might have plugged into it. You can plug it back in after your install.
Insert the USB flash drive you prepared earlier into the front of the NUC
Turn on the NUC and press the F10 key on your keyboard. Continue to hold the F10 key down until you appear at a menu that is asking you which device you'd like to boot from.
Select the USB flash drive.
Follow the instructions to install Roon OS. This procedure can take a few minutes, depending on the performance of your USB flash drive and the SSD to which you are installing.
Once it is done installing, unplug the USB flash drive and hit ENTER to reboot.
On next boot, don't hold F10, so it can boot from the SSD. A few seconds later, you should be booted up and see a message related to your network status.
Turn off your NUC.
Unplug any USB storage you might have plugged into it. You can plug it back in after your install.
Insert the USB flash drive you prepared earlier into the front of the NUC
Turn on the NUC and press the F10 key on your keyboard. Continue to hold the F10 key down until you appear at a menu that is asking you which device you'd like to boot from.
Select the USB flash drive.
Follow the instructions to install Roon OS. This procedure can take a few minutes, depending on the performance of your USB flash drive and the SSD to which you are installing.
Once it is done installing, unplug the USB flash drive and hit ENTER to reboot.
On next boot, don't hold F10, so it can boot from the SSD. A few seconds later, you should be booted up and see a message related to your network status.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
