DEVIALET now Roon Ready.

[BoyScout]

@BoyScout

OK, so two things,

1. Yes it should work exactly like Roon Air, all I had to do after applying the firmware update on both of my Devialets (I have dual mono), was to reinsert the configuration SD cards into each of the Devialets, restart them, and then ensure the output on them was set to Roon Ready. After that, I launched Roon, went into Settings -> Audio, and in the Networked section, I found Roon Ready Devialet, I gave it a Zone name. Then I made sure to select that Zone for audio output (I clicked the Devialet icon in the main music playback window). No other changes were required.

2. All that said, I use an ethernet connection to my switch from my Roon NUC and an ethernet connection from my Devialet to the switch. So I am not using wireless. You should NOT need a cable between the core and the Devialet, assuming that each device is setup either wired to ethernet or enabled for your WIFI network.

Hope that helps.

Helps a lot.
I thought i was wrong but, according to your descrption, i did all properly, this time.
I read somewhere that we need to wait from 24 to 48 hours, but it´s strange because some people (like you) didn´t need to wait.
I´ll wait until tomorrow, after that i´ll contact Devialet staff.
Thanks again, baddog.