06-Jun-2019, 20:38
(06-Jun-2019, 20:24)Manfred Wrote: I started my Devialet Journey with D170 now D220Pro CI. With D170, AIR, Win7 everything works fine up Win 10 was introduced. With D220 Pro and the CI module, UpNP did not work - stuttering, AIR with JRMC did not work unstable, stuttering and also as I started with ROON, ROON RAAT did not work "Pause" during playback, until I found the following solution for me:Manfred, would I be correct to surmise that the following four things made your system workable:
I have a managed Linksys switch, where my Devialet is connected to (see attached architecture overview figure).
If I configure my switch according to the following table everything works UPnP, AIR and RAAT:
1) Managed switch
2) Restrict port for Devialet to 100Mbps
3) Disable auto negotiation for Devialet port
4) Enable flow control for Devialet port
Also, have you had ANY problems with this set-up when using Roon?
Thanks.
Devialet Expert 220 Pro Kinki EX-M7 power amp tethered to a fiber-fed Lumin X1 streamer via Grimm XLRs, Vivid B1 Decade speakers in Rosso Barchetta red (only 200 produced in a limited edition), Roon Nucleus with a Samsung 860 EVO 2TB SSD, etherREGEN switch fed by a Sonore opticalModule (and Sonore-supplied transceivers and 1M optical cable) with a SOtM dCBL-Cat7 cable to my Nucleus and a DH Labs Reunion Cat8 to my Lumin T2 streamer, Keces P8 linear power supply feeding a (to come) NUC and EtherREGEN switch with an external AfterDark OCXO clock., and opticalModule (5V/1A), AudioQuest Niagara 1000 power conditioner, ASI LiveLine loom (purchased directly from Franck Tchang when I lived in France), Less Loss Firewall for Speakers and Roon lifetime license with Tidal streaming.
