Firmware 13.2.0 - DOS 2.2.6 for Expert Pro - Release note

[Bartype]

I would be curious if anyone out there has tried the sweet room DSP and can compare the SQ to measuring your room and generating filters in REW and adding them in ROON? Is the sound quality better if the DSP is done in the Devialet? It certainly is easier to generate several sets of filters in REW put them in ROON and then you can quickly A/B them.

Well, i have tried put a simple one frequency setting within Roon and exactly the same settings within sweet room. I can tell Roon is sounding much better with this same setting compared to Sweet room, which sounds flat... Or i am doing something wrong.

Not all equalisers use the same formulae and Roon and Sweet Room are different.

For example

Roon
For the Peaking filters the bandwidth in Hz between the half gain points is given by:

Bandwidth = centre frequency/Q

100hz  6db  Q=7.079


Sweet Room
For the Peaking filters the bandwidth in Hz between the half gain points is given by:

Bandwidth = sqrt(gain)*centre frequency/Q

100hz  6db  Q=10


As you can see, the Q values are different in generating the same filter shape.

You can convert Roon filters to Sweet Room filters by using REW.
Within REW, select EQ tab, choose the 'Generic' equaliser for Roon, enter the filter values then change the equaliser to 'Rephase'.

GREAT, thank you, i'll try this out!