Firmware 9.0.1 - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet News (https://devialetchat.com/Forum-Devialet-News) +--- Thread: Firmware 9.0.1 (/Thread-Firmware-9-0-1) |
RE: Firmware 9.0.1 - Cylob - 26-Dec-2015 (26-Dec-2015, 14:01)moreno1973 Wrote:(26-Dec-2015, 10:27)Cylob Wrote:(24-Dec-2015, 23:14)moreno1973 Wrote: IMO great soundstage plus more musicality in the mids and highs is offering 7.1.3 comparing to 8.1.3 Bummer. There's that trade-off once again. Looks like you might go back to 7.1.3... I'm still a happy camper after hours and hours of playing my reference library with 7.3.1. Haven't heard anything that came out worse then before. Even harsh stuff plays smooth and crystal clear now. RE: Firmware 9.0.1 - moreno1973 - 26-Dec-2015 (26-Dec-2015, 14:53)Cylob Wrote:(26-Dec-2015, 14:01)moreno1973 Wrote:(26-Dec-2015, 10:27)Cylob Wrote: Your so right on that. Installed it an I really love 7.1.3. Wait some days...You will be much happier:-) Smooth and crystal clear with great soundstage and fun factor while listening music. As I said before with 7,1,3 my 200 is a right match for my loudspeakers (SF Auditor M). 8.1.3 was much more harsher and caused fatigue after 1 hour of listening. RE: Firmware 9.0.1 - miro - 27-Dec-2015 (26-Dec-2015, 11:53)Cylob Wrote:(26-Dec-2015, 10:37)LEPPAL Wrote: Can anyone provide a link to 7.1.3? I can't seems to access it from Devialte's site. Any assistance is much appreciated. Will the configuration files from 8.1.3 work with 7.1.3? Basically, how can one generate configuration files for an old firmware version that is no longer supported by the configurator? RE: Firmware 9.0.1 - octaviars - 27-Dec-2015 (27-Dec-2015, 18:58)miro Wrote:(26-Dec-2015, 11:53)Cylob Wrote:(26-Dec-2015, 10:37)LEPPAL Wrote: Can anyone provide a link to 7.1.3? I can't seems to access it from Devialte's site. Any assistance is much appreciated. I dont know but I think if you dont use any of the new features like RAM or SAM V2 you can use the configurator today for a old firmware but I am not shure. Otherwise you need to have an old configuration file to use. I have all firmwares back to 7.1.1 but I was stupid not to save any of the old configurations file on my computer. RE: Firmware 9.0.1 - Rufus McDufus - 27-Dec-2015 Devialet don't really make it clear about backwards/forwards compatibility with the configurator. They don't seem to even publish the version of the configurator at any one time. The assumption seems to be the configurator will write a config for the current version, but not necessarily an older one. I've tried to write configs for earlier firmware versions and they're not always recognised by my D200, and I now make sure I keep a copy of the config alongside each firmware version just in case I want to revert versions at any time. It should in theory be possible and quite easy for them to make previous configurator versions available if the current configurator isn't capable of producing configs for earlier firmware versions - and/or sort out their backward/forward compatibility. RE: Firmware 9.0.1 - Arjan - 28-Dec-2015 The right firmware is system dependent. In my system 7.1.3 is nice but loses out on the bass. The bass is more present on 8.1.3 and 9.0.1. Not a small difference in my system. 7.1.3 is more relaxed and has a great soundstage. The soundstage is impressive. The 9.0.1 (and 8.1.3) is in your face. Your transported from back row to front row and the soundstage is is probably more realistic compared to 7.1.3. (Not as exciting!) I will stick with 9.0.1 for the coming weeks to see if I can get used to it. RE: Firmware 9.0.1 - Hifi_swlon - 28-Dec-2015 As far as my experimenting has gone, the current configurator (at least before 9 came out) could write files compatible back to at least 7.1.1 which I use. There was a hazy ground when the SAm v2 first came out, and a few bugs, but essentially a new config should be backwards compatible - both SAm versions are written to the file and any unrecognised settings are ignored. How far beyond 7.1.1 you can go back I'm not sure. I only have a 200 and don't configure it extensively, so I'm sure there could be situations where things might come a cropper, but so far has been ok for me. What would be really nice is that the configurator showed hints as to what version each setting requires so you didn't have to remember what settings worked with what version, to save adjusting things that have no affect with what you're running. Or have a drop down in the advanced configurator for firmware in use, so it could grey out irrelevant features. I guess they assume the latest but thats not a very good system. Hope everyone had a great Christmas btw. Just back and saw this new major firmware thread, and unless I'm mistaken (haven't had time to read all the way through) it adds practically nothing unless you buy a '900' in which case it lets you use it. Unless I'm missing something? RE: Firmware 9.0.1 - Floyd67 - 29-Dec-2015 (23-Dec-2015, 21:22)moreno1973 Wrote: Hi Moreno1973, Hi, would you be kind enough to send me the 7.1.3 files please. I'd like to make a comparison. Thanks and regards RE: Firmware 9.0.1 - Cylob - 29-Dec-2015 Here you go, Floyd: Link to Rufus post with old firmwares [#375] Straight link to download area RE: Firmware 9.0.1 - Floyd67 - 29-Dec-2015 (29-Dec-2015, 18:21)Cylob Wrote: Here you go, Floyd: Many thanks Cylob and Happy New Year. |