15-Jul-2022, 22:45
Seems with AIR driver fix etc. there are some resources and it’s a good timing to being this major bug up again. Would be great if you can write to support about all your detailed bug report you already collected.
Stereonet Devialet Article
|
15-Jul-2022, 22:45
Seems with AIR driver fix etc. there are some resources and it’s a good timing to being this major bug up again. Would be great if you can write to support about all your detailed bug report you already collected.
16-Jul-2022, 01:54
(12-Jul-2022, 23:49)daniel.avasilichioaei Wrote: Devialet has not suggested doing this because this is a workaround, which should not have been necessary, as the configurator should have worked 100% well. (13-Jul-2022, 08:32)audio_engr Wrote:(12-Jul-2022, 21:49)mdconnelly Wrote: The fact that there is any sonic change is remarkable and makes one wonder why Devialet has not suggested doing this or even acknowledged that it as a viable option. I will definitely give it a try sometime soon. Thank you for the write up. I am tempted to try this too. Just to be sure, you didn’t change the way the speaker cables need to attached to the double mono setup either? I fear breaking my speakers if I do things wrong.
Aurender N10 - Kharma Enigma Signature AES/EBU - Devialet 400 - MIT SL-Matrix 28s - Audio Physic Virgo 25 Plus - IsoAcoustics Gaia II - AudioQuest Diamond RCA-AES between Master and Companion - Silent Angel Bonn N8 - AudioQuest Diamond Ethernet cable - Keces P3 with Hifi-Tuning Supreme 3 Silver fuse - GigaWatt 16A automatic circuit breaker - Vibex One 6 Cu - Shunyata Research ΞTRON Alpha Digital and ΞTRON Z PC-10 powercords - Qobuz 24 bit Studio
The Netherlands
16-Jul-2022, 05:43
(16-Jul-2022, 01:54)kerkhoffd Wrote:(12-Jul-2022, 23:49)daniel.avasilichioaei Wrote: Devialet has not suggested doing this because this is a workaround, which should not have been necessary, as the configurator should have worked 100% well. The workaround has nothing to do with speaker cables: you don't have to change anything here. If you are already using dual-mono without a trigger, then the easiest and safest way to apply the workaround is as described in post #26 ([url=https://devialetchat.com/Thread-Stereonet-Devialet-Article?pid=106420][/url]https://devialetchat.com/Thread-Stereonet-Devialet-Article?pid=106420#pid106420): - The MASTER file is the same. - For COMPANION file, just edit the MASTER configuration and change audio channel (left / right) and audio input (and name, if you want).
24-Jul-2022, 17:53
@audio_engr - How are you configuring your RCA - XLR link in the Master-L/Master-R configurations? Are you just setting the XLR as an audio input in the Master of the Master-R configuration so that your Master-L config ink connection is the RCA and the Master-R config link connection is the XLR? This has me a bit confused because it doesn't appear you can configure a Master-Companion with the XLR connection on the Master. I must be missing something.
Any insight is appreciated. Thanks. Devialet 440 Pro (two 220s)- Oracle CD transport - Kuzma Stabi S/Stogi S turntable - Von Schweikert VR-35 speakers - JPS SC3 SCs - PI Audio power conditioning -
Triode Wire Labs ICs and PCs - Roon on NUC 8i7beh running ROCK Durham, NC USA
24-Jul-2022, 18:26
(24-Jul-2022, 17:53)mdconnelly Wrote: @audio_engr - How are you configuring your RCA - XLR link in the Master-L/Master-R configurations? Are you just setting the XLR as an audio input in the Master of the Master-R configuration so that your Master-L config ink connection is the RCA and the Master-R config link connection is the XLR? This has me a bit confused because it doesn't appear you can configure a Master-Companion with the XLR connection on the Master. I must be missing something. "Are you just setting the XLR as an audio input in the Master of the Master-R configuration so that your Master-L config ink connection is the RCA and the Master-R config link connection is the XLR?" Answer: Yes. In configurator, you can edit again the master from the "Master-L" configuration and perform these actions (on master unit): - Rename the master from "Master-L" to Master-R". - Change the speaker from left to right. - Turn off all audio inputs, and turn on XLR input only. - Save the configuration file.
Is it possible to use in this configuration also the Expert in a AV setup for the stereo channels? Meaning line-in?
And has anyone got feedback from support what is going wrong here Software side/ in the online configurator? Seems there is a lot of potential, performance missing resp. to be exploited.
24-Jul-2022, 22:38
(24-Jul-2022, 20:45)markush Wrote: Is it possible to use in this configuration also the Expert in a AV setup for the stereo channels? Meaning line-in? Yes, you can use this master-master configuration just as you use the normal master-companion configuration. The only limitation is that you cannot use the audio inputs from the "companion". So, you can use any audio input from the "master", including line-in.
one hint: you should not use "save volume". This sets only the volume on the master-master, not on the slave-master if you change the source.
You can also not use the pass-through mode as this disables the digital-out.
25-Jul-2022, 08:32
(25-Jul-2022, 08:16)Vivialet Wrote: one hint: you should not use "save volume". This sets only the volume on the master-master, not on the slave-master if you change the source. Except for the audio input, speaker (left/right) and configuration name, all settings mus be identical on master-master ans master-slave.
25-Jul-2022, 14:32
(This post was last modified: 25-Jul-2022, 14:34 by audio_engr.)
Here's a quick feedback after having used my Dual mono as MASTER-L (Left ch) and MASTER-R (Right ch) for almost 2 weeks.
- The Center fill area of the soundstage is so much more denser with more info. - The Temperatures of Class-A, Class-D & Power Supply for both Master-L and Master-R and now identical. This never happened earlier. - Have had NO issues in operating the Dual mono with this config. Thx to @daniel.avasilichioaei for making this happen! Roon Nucleus w/ Hypsos PSU & AQ Tornado + Roon RAAT > AQ Diamond ETH > etherREGEN using SFP + Hypsos PSU | CEC TL-5 CD Transport + AQ Z3 + 3 x Orea Indigo > AQ Diamond AES/EBU
Devialet 440-Pro CI > AQ Wel Sig RCA-XLR | 6 x Orea Bronze, 2 x Synergistic Research Atmosphere PC | B&W 802 D3 {Bi-wired} > AQ WEL Signature (Biwire)
REL G1-Mk2 pair | PS Audio PP 12 + AQ NRG-1000 | Puritan GroundMaster + RouteMaster | SAM DISABLED - DPM OFF - Northern Virginia - US
|
« Next Oldest | Next Newest »
|