(08-Jun-2021, 15:09)Lee inseok Wrote: After this firmware upgrade, it was confirmed that the optical input signal can be received stably at 24bit/192khz.
I have 3 golds and 2 silvers.
[mention]Lee inseok [/mention] Very interesting! Presumably you are referring to Direct Optical mode and not the regular optical input??
(08-Jun-2021, 15:09)Lee inseok Wrote: After this firmware upgrade, it was confirmed that the optical input signal can be received stably at 24bit/192khz.
I have 3 golds and 2 silvers.
[mention]Lee inseok [/mention] Very interesting! Presumably you are referring to Direct Optical mode and not the regular optical input??
09-Jun-2021, 16:20 (This post was last modified: 10-Jun-2021, 11:01 by struts.)
(09-Jun-2021, 16:17)Lee inseok Wrote:
(09-Jun-2021, 14:21)struts Wrote:
(08-Jun-2021, 15:09)Lee inseok Wrote: After this firmware upgrade, it was confirmed that the optical input signal can be received stably at 24bit/192khz.
I have 3 golds and 2 silvers.
[mention]Lee inseok [/mention] Very interesting! Presumably you are referring to Direct Optical mode and not the regular optical input??
Sent from my iPhone using Tapatalk
I am using the general optical input method.
*Very* interesting. @streamy, are you able to test this?
10-Jun-2021, 19:53 (This post was last modified: 10-Jun-2021, 19:56 by Lee inseok.)
(09-Jun-2021, 16:20)스트럿 Wrote:
(09-Jun-2021, 16:17)이인석 Wrote:
(09-Jun-2021, 14:21)스트럿 Wrote: [멘션] 이인석 [/ 멘션] 아주 재미 있어요! 아마도 당신은 일반 광 입력이 아닌 직접 광 모드를 참조하고 ??
Tapatalk를 사용하여 내 iPhone에서 보냄
일반적인 광 입력 방식을 사용하고 있습니다.
* 매우 흥미로운. @ "streamy", 가지고있는 테스트 할 수 있습니까?
Tapatalk를 사용하여 내 iPhone에서 보냄
스피커를 ADC 연결 방식으로 연결합니다.
그 전에는 24bit / 192khz로 고정 된 adc를 사용했는데 약 5, 6 초 동안 소리가 나더니 케이블을 빼지 메시지가 나부터 사용했습니다.
금 3 개와은 2 개로 테스트했지만 똑 같았습니다.
이제 adc는 설정 값을 수있는 rme adi-2 fs라는 모델인데, 이번 펌웨어 업그레이드 후 궁금한 다양한 값을 시도 해봤습니다.
44.1, 48, 96, 192에서는 모두 잘 작동했지만 132에서는 광 케이블이 연결되지 않았습니다.
10-Jun-2021, 21:18 (This post was last modified: 10-Jun-2021, 21:21 by streamy.)
That’s what Google translates from @Lee inseok
Connect the speaker using the ADC connection method.
Before that, I used adc fixed at 24bit / 192khz, and it made a sound for about 5 or 6 seconds, and then I used it from the time I got the message to unplug the cable.
I tested it with 3 gold and 2 silver and it was the same.
Now, adc is a model called rme adi-2 fs that can set values, and after this firmware upgrade, I tried various values that I was curious about.
44.1, 48, 96 and 192 all worked fine, but on 132 the fiber was not connected.
Internally, we see how to measure processing value.