Devialet Chat

(16-Feb-2019, 16:01)Drifter Wrote: [ -> ]Thanks @douglas @Axel

That is the issue i.e. there is no RAAT output in my Roon Audio Settings.
It picks up Air as the only networked device.
I'm scratching my head here, I'm stumped ......


free upload image share

Have you tried closing and restarting Roon Core on the Mac?

(16-Feb-2019, 16:35)Axel Wrote: [ -> ]

(16-Feb-2019, 16:01)Drifter Wrote: [ -> ]Thanks @douglas @Axel

That is the issue i.e. there is no RAAT output in my Roon Audio Settings.
It picks up Air as the only networked device.
I'm scratching my head here, I'm stumped ......


free upload image share

Have you tried closing and restarting Roon Core on the Mac?

Yeah, restart all and check again. Routers aso also.

Okay, so I switched the Devialet's off at the plug and restarted them.
Also the modem/router and Mac.
Still nothing.

(16-Feb-2019, 16:55)Drifter Wrote: [ -> ]Okay, so I switched the Devialet's off at the plug and restarted them.
Also the modem/router and Mac.
Still nothing.

I don’t get it. Are you sure that your firmware upgrade was a success? AFAIK that’s the only thing that would stop the new zone appearing in Roon.

Yes.
Also, as I mentioned, when I toggle through the sources Roon Ready appears as an input.

Must Roon Ready be the active source before Roon will show RAAT as an output? I can't think that this a prerequisite.

When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?

(16-Feb-2019, 18:21)IRSI Wrote: [ -> ]When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?

See post by drifter on page 11 that. Refers to the roon buffer. I think that will fix your problem.

(16-Feb-2019, 22:38)mmorrison55 Wrote: [ -> ]

(16-Feb-2019, 18:21)IRSI Wrote: [ -> ]When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?

See post by drifter on page 11 that. Refers to the roon buffer. I think that will fix your problem.

I'm using Ethernet connection not USB. In this case I can't set a buffer.

(17-Feb-2019, 06:46)IRSI Wrote: [ -> ]I'm using Ethernet connection not USB. In this case I can't set a buffer.

True. The only setting is "Resync Delay". According to the text popup this only works on sample rate change, but maybe...    I've used this with my Mutec as it tends to cut a little on a track start while figuring out the sample rate.

(17-Feb-2019, 10:19)ogs Wrote: [ -> ]

(17-Feb-2019, 06:46)IRSI Wrote: [ -> ]I'm using Ethernet connection not USB. In this case I can't set a buffer.

True. The only setting is "Resync Delay". According to the text popup this only works on sample rate change, but maybe...    I've used this with my Mutec as it tends to cut a little on a track start while figuring out the sample rate.

Like @ogs says, set the Resync Delay.  I’ve got mine set to 500ms and it’s cured the problem of the beginnings of tracks being lopped off.