Posts: 12
Threads: 2
Joined: Dec 2019
Reputation:
0
Hello , i have a devialet expert 200 for a few years and a few months ago i buyed a slave 200 extra so that i can make a 400 system.But i don't no how i do it but when i make a new configuration it will not go to the 400 modus ( in the configuration i click on the expert 400 button and make a configuration ) when i put the sd card into the devialet it will not go to 400 instead of 200 ! My old sd card cofiguration will go to 400 without any problem .what do i not right ? Maby someone of you have the right answer for me ! greetings , hans
Posts: 2,355
Threads: 32
Joined: Jun 2014
Reputation:
86
Hi Hans,
Welcome to the forum. Try there below. It's always worked for me. Usually, if it doesn't work, delete everything and start a new configuration from the start.
https://devialetchat.com/Thread-How-to-c...l-s-method
Good luck!
Pim
Lifetime Roon, Mac mini, int. SSD, ext. HDD, tv as monitor, key board and track pad on bean bag as remote,Devialet 200, Od'A #097, Blue jeans speaker cable,
Dynaudio C1 MkII.
Jim Smith's GBS.
Northern NSW Australia.
Posts: 258
Threads: 1
Joined: Mar 2015
Reputation:
5
I would first try and get the 400 to work, and only then experiment with the looping to another set elsewhere in the house. Not sure the pre out was intended for that setup.
Aurender N10 - Kharma Enigma Signature AES/EBU - Devialet 400 - MIT SL-Matrix 28s - Audio Physic Virgo 25 Plus - IsoAcoustics Gaia II - AudioQuest Diamond RCA-AES between Master and Companion - Silent Angel Bonn N8 - AudioQuest Diamond Ethernet cable - Keces P3 with Hifi-Tuning Supreme 3 Silver fuse - GigaWatt 16A automatic circuit breaker - Vibex One 6 Cu - Shunyata Research ΞTRON Alpha Digital and ΞTRON Z PC-10 powercords - Qobuz 24 bit Studio
The Netherlands