Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
16-Feb-2019, 16:35
(This post was last modified: 16-Feb-2019, 16:36 by Axel.)
(16-Feb-2019, 16:01)Drifter Wrote: Thanks @douglas @Axel
That is the issue i.e. there is no RAAT output in my Roon Audio Settings.
It picks up Air as the only networked device.
I'm scratching my head here, I'm stumped ......
![[Image: Screenshot-2019-02-16-at-16-53-13.png]](https://i.postimg.cc/t4tjjTnn/Screenshot-2019-02-16-at-16-53-13.png) free upload image share
Have you tried closing and restarting Roon Core on the Mac?
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Posts: 230
Threads: 6
Joined: Nov 2015
Reputation:
4
16-Feb-2019, 16:42
(This post was last modified: 16-Feb-2019, 16:42 by Waiski.)
(16-Feb-2019, 16:35)Axel Wrote: (16-Feb-2019, 16:01)Drifter Wrote: Thanks @douglas @Axel
That is the issue i.e. there is no RAAT output in my Roon Audio Settings.
It picks up Air as the only networked device.
I'm scratching my head here, I'm stumped ......
free upload image share
Have you tried closing and restarting Roon Core on the Mac? Yeah, restart all and check again. Routers aso also.
Posts: 143
Threads: 8
Joined: Jun 2016
Reputation:
5
Okay, so I switched the Devialet's off at the plug and restarted them.
Also the modem/router and Mac.
Still nothing.
Devialet 440PRO CI/ Mola Mola Tambaqui + Kalugas / Vivid Audio Giya G2
Cape Town, South Africa
Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
(16-Feb-2019, 16:55)Drifter Wrote: Okay, so I switched the Devialet's off at the plug and restarted them.
Also the modem/router and Mac.
Still nothing.
I don’t get it. Are you sure that your firmware upgrade was a success? AFAIK that’s the only thing that would stop the new zone appearing in Roon.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Posts: 143
Threads: 8
Joined: Jun 2016
Reputation:
5
Yes.
Also, as I mentioned, when I toggle through the sources Roon Ready appears as an input.
Must Roon Ready be the active source before Roon will show RAAT as an output? I can't think that this a prerequisite.
Devialet 440PRO CI/ Mola Mola Tambaqui + Kalugas / Vivid Audio Giya G2
Cape Town, South Africa
Posts: 10
Threads: 0
Joined: Feb 2019
Reputation:
0
When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?
Posts: 180
Threads: 18
Joined: Oct 2018
Reputation:
6
(16-Feb-2019, 18:21)IRSI Wrote: When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?
See post by drifter on page 11 that. Refers to the roon buffer. I think that will fix your problem.
Posts: 10
Threads: 0
Joined: Feb 2019
Reputation:
0
(16-Feb-2019, 22:38)mmorrison55 Wrote: (16-Feb-2019, 18:21)IRSI Wrote: When I skip a track in Tidal or Qobuz the first seconds are missing! I use a Devialet 250 Pro Core Infinity with LAN and Roon Raat. Are there any other users who have this issue?
See post by drifter on page 11 that. Refers to the roon buffer. I think that will fix your problem.
I'm using Ethernet connection not USB. In this case I can't set a buffer.
Posts: 2,067
Threads: 31
Joined: Jun 2014
Reputation:
69
(17-Feb-2019, 06:46)IRSI Wrote: I'm using Ethernet connection not USB. In this case I can't set a buffer.
True. The only setting is "Resync Delay". According to the text popup this only works on sample rate change, but maybe... I've used this with my Mutec as it tends to cut a little on a track start while figuring out the sample rate.
*
Devialetless!
Roon, ROCK/Audiolense XO/Music on NAS/EtherRegen/RoPieee/USPCB/ISORegen/USPCB/Sound Devices USBPre2/Tannoy GOLD 8
250 Pro CI, MicroRendu(1.4), Mutec MC-3+USB
Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
(17-Feb-2019, 10:19)ogs Wrote: (17-Feb-2019, 06:46)IRSI Wrote: I'm using Ethernet connection not USB. In this case I can't set a buffer.
True. The only setting is "Resync Delay". According to the text popup this only works on sample rate change, but maybe... I've used this with my Mutec as it tends to cut a little on a track start while figuring out the sample rate.
Like @ ogs says, set the Resync Delay. I’ve got mine set to 500ms and it’s cured the problem of the beginnings of tracks being lopped off.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
|
