Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ledesc D200
#1
Hi guys.

Here am I, with brand new D200 and B&W 805 D !!!!!

Just updated with 7.1.3 (the factory firmware was 7.1.2) and made a quick config.

I just begin with some difficulties, first the IOS remote on my iPhone just shows informations, but I can't interact, if I perform an actions notion happens, but if I use the real remote I can see the new information on the iPhone.....

Second, I just installed AIR on my windows PC, but I can't enable AIR streaming, I just see Disable Devialet AIR that is ticked on the icon in the task bar...

So I begin this journey with CDs !!!!!!

Advices will be appreciated Wink

Edit (May 2016): pictures in my new apartment

[Image: 62d248f79b5340df6fdfd4b3f0aaefaf.jpg]

[Image: fd47d8cc6cdd31c8dc8604dad30691a5.jpg]

[Image: beabb5850ae3ee8a393c706a449e8f8f.jpg]

[Image: 891b069656681c90b4cf64e386d154d8.jpg]

[Image: 14e7015cc2ead55550e7405e9b52ccb3.jpg]

[Image: bfdd040d4c7fb8981a0216164b5d77bb.jpg]
B&W 805d - Athom Zef Max - Devialet D200 - AIR Ethernet - Roon ROCK (NUC8i3BEH + LPSU100) - Qobuz

- FR -
Reply
#2
Another sighting of the illusive 7.1.2 .....
Reply
#3
I do not understand....
The wifi is set up, on the dev screen it's ok, ip showed... But I can't ping it....

Is the wifi faulty ?

When wifi only, on the remote app of the iPhone I see Wifi, but can't control anything, when I plug my Ethernet cable, then it show eth on the remote and I can control....
B&W 805d - Athom Zef Max - Devialet D200 - AIR Ethernet - Roon ROCK (NUC8i3BEH + LPSU100) - Qobuz

- FR -
Reply
#4
(22-May-2015, 18:59)ledesc Wrote: I do not understand....
The wifi is set up, on the dev screen it's ok, ip showed... But I can't ping it....

Is the wifi faulty ?

Sounds unlikely that the wi-fi is faulty if it's connected to the AP and been assigned an IP address (I assume you're using DHCP).

Firewall problem?  Are you pinging it from a PC or Mac? Oh, I see you mentioned "task bar" above so I guess a PC. Might be worth trying with the firewall disabled, temporarily.
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
Reply
#5
Yes I both tried DHCP and fixed IP.
You can ping the wifi IP ?
I have no firewall, everything (iPhone, iPad, PC...) can connect to the internet box in wifi.
B&W 805d - Athom Zef Max - Devialet D200 - AIR Ethernet - Roon ROCK (NUC8i3BEH + LPSU100) - Qobuz

- FR -
Reply
#6
Yes, the wi-fi interface should respond to ping. (At least, it does with 7.1 firmware; I haven't tried 8.0.)

I meant the Windows firewall, by the way.

Have you tried a wired connection?
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
Reply
#7
(22-May-2015, 17:44)ledesc Wrote: Hi guys.

Here am I, with brand new D200 and B&W 805 D !!!!!

Hello

Listen Your system with SAM on!!! 805D sounds much better with SAM...
Reply
#8
Yes SAM on Wink
I put another config (DPM off) and know the app remote works....
Will check tomorrow as my wife just arrived from work.
Let's demo with her favorite CDs !!!!!!
B&W 805d - Athom Zef Max - Devialet D200 - AIR Ethernet - Roon ROCK (NUC8i3BEH + LPSU100) - Qobuz

- FR -
Reply
#9
(22-May-2015, 17:44)ledesc Wrote: I just begin with some difficulties, first the IOS remote on my iPhone just shows informations, but I can't interact, if I perform an actions notion happens, but if I use the real remote I can see the new information on the iPhone.....

Did you under configurator, remote settings "Authorised" app remote control? If not, enable it and load new configuration into devialet.
Reply
#10
Great stuff! Maybe DPM turns off the network interfaces when the unit is in standby - if so, thanks for finding out!

Anyway, enjoy your listening!
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)