Master/slave link

[Mikeeo]

I think part of issue people are having with the stock Crystal cable is digital cables take a long time to burn-in.

I put mine on my Hager-Tech Frykleaner for three days before using it.

I guess the resulting SQ was much better then!? 
I used my Crystal cable between my Oppo player and Dev for + 1000 hours, and I can't say it made  much difference from the initial SQ. Compared to the RCA-AES/EBU solution it not on the same level. My own RCA-RCA construction is still better than the Crystal.

Maybe a cooker is the answer to break it?

Happy with my RCA-AES/EBU set up/Mike

[miro]

Does Anyone know for sure if the Audioprana SP/Dif-AES/EBU cable uses a transformer? Either under the wood collar midway between the connectors or within either of the connectors?

Thanks

Kerry

Why don't you directly ask the Audioprana person him/herself?

I E-mailed them but have no response yet.  I should be more patient!

Did they reply?

[miro]

Ordered this now



The Neutrik NA2FPMM 3 pole XLR Male – RCA Plug (http://www.neutrik.com/en/accessories/ci...rs/na2mpmm)

to use with a Van Den Hul AES-EBU 110 Ohm professional interconnect



The XLR interconnect was laying around doing nothing, so i thought to order the Neutrik adapter and try the RCA-XLR Master/Slave link.

will report back once it arrives

So, how does this compare with the Audioprana cable in terms of SQ?

[GuillaumeB]

Which £3500 1m cable are you using between your master and slave units?

It's the Transparent Reference XL 75 ohm SPDIF:

http://www.theabsolutesound.com/articles...ital-link/

Guillaume

[amabrok]

Which £3500 1m cable are you using between your master and slave units?

It's the Transparent Reference XL 75 ohm SPDIF:

http://www.theabsolutesound.com/articles...ital-link/

Guillaume

Hi GuillaumeB,

I would have expected you to choose the 110 ohm. Any particular reason why you chose the 75 ohm?


Sent from my iPhone using Tapatalk

[GuillaumeB]

Which £3500 1m cable are you using between your master and slave units?

It's the Transparent Reference XL 75 ohm SPDIF:

http://www.theabsolutesound.com/articles...ital-link/

Guillaume

Hi GuillaumeB,

I would have expected you to choose the 110 ohm. Any particular reason why you chose the 75 ohm?


Sent from my iPhone using Tapatalk

You mean as in a hybrid cable? 

Guillaume

[Mikeeo]

Which £3500 1m cable are you using between your master and slave units?

It's the Transparent Reference XL 75 ohm SPDIF:

http://www.theabsolutesound.com/articles...ital-link/

Guillaume

Hi GuillaumeB,

I would have expected you to choose the 110 ohm. Any particular reason why you chose the 75 ohm?


Sent from my iPhone using Tapatalk

You mean as in a hybrid cable? 

Guillaume

G, I guess you're running RCA-RCA 75 ohm and not into the AES/EBU (hybrid)?

/Mike

[GuillaumeB]

G, I guess you're running RCA-RCA 75 ohm and not into the AES/EBU (hybrid)?

/Mike

Correct! At the time (going back well over a year) I wasn't convinced by the rationale behind the hybrid and there were conflicting guidelines on the subject coming from Devialet anyway. So I opted for more of a purist approach. When I put this cable into my system there was such a dramatic improvement (yes, night and day) that it was a no brainer quite frankly!

Many months later I found out about the Audioprana hybrid, hence my sharing of this on the forum.

Guillaume

[amabrok]

Which £3500 1m cable are you using between your master and slave units?

It's the Transparent Reference XL 75 ohm SPDIF:

http://www.theabsolutesound.com/articles...ital-link/

Guillaume

Hi GuillaumeB,

I would have expected you to choose the 110 ohm. Any particular reason why you chose the 75 ohm?


Sent from my iPhone using Tapatalk

You mean as in a hybrid cable? 

Guillaume

Yes I thought you were running a hybrid RCA-XLR


Sent from my iPhone using Tapatalk

[miro]

G, I guess you're running RCA-RCA 75 ohm and not into the AES/EBU (hybrid)?

/Mike

Correct! At the time (going back well over a year) I wasn't convinced by the rationale behind the hybrid and there were conflicting guidelines on the subject coming from Devialet anyway. So I opted for more of a purist approach. When I put this cable into my system there was such a dramatic improvement (yes, night and day) that it was a no brainer quite frankly!

Many months later I found out about the Audioprana hybrid, hence my sharing of this on the forum.

Guillaume

You can try with the Neutrik NA2FPMM 3 pole XLR Male – RCA Plug (http://www.neutrik.com/en/accessories/circular-adapters/na2mpmm)
on the side of the slave unit.


I am also extremely happy with my Stereolab Tombo Tron coaxial 75-ohm ($2,000), but might try combining it with the Neutrik NA2FPMM as well.