(20-Dec-2017, 18:49)f1eng Wrote: [ -> ]I have the Roon trial running on an iMac streaming via Air without any problems so far, though I rarely stream for as long as 2 hours continuously. Just listening to Mahler 3 at the moment which is quite long and almost finished without glitch.
I mainly listen to CDs though.
Are you connected by Ethernet or wireless? What format and bitrate is your Mahler recording?
I get a bug when I use the remote to alter tone whilst using Roon, I get the ‘device in use’ message and can only get it working with Roon again by pulling the plug on the Pro. Anyone else seeing this behaviour?
@
Dannythered I am not able to replicate that issue. I am running the Beta firmware.
1. Have Roon playing, select Tone button on remote, and change Treble to +5 then move back to 0. Push Tone Control again to return to normal state of controlling volume.
2. Pause Roon, select Tone button on remote, and change Treble to +5 then move back to 0. Push Tone Control again to return to normal state of controlling volume.
In either instance, I don't get a "device in use" error.
Interestingly I just tried with no issue, tried again and got the issue after scrolling through all other options, I’m running latest firmware not beta
I have several problem post CI. One of them is a slight hum from the speakers that I haven't had before. Also my Ethernet doesn't work and hirez is unstable thru AIR with lots of noise on dsd. This is really frustrating and I'm regretting sending the unit for upgrade. Running beta 2.2.
Hum is a bad issue of course as it is very likely not ralated to firmware. Is someone else also having this problem ?
Just got ‘device in use’ when switching to a Tidal album, first time ever....
(21-Dec-2017, 03:07)Axel Wrote: [ -> ] (20-Dec-2017, 18:49)f1eng Wrote: [ -> ]I have the Roon trial running on an iMac streaming via Air without any problems so far, though I rarely stream for as long as 2 hours continuously. Just listening to Mahler 3 at the moment which is quite long and almost finished without glitch.
I mainly listen to CDs though.
Are you connected by Ethernet or wireless? What format and bitrate is your Mahler recording?
Sorry for delay, don't check often and never have notifications...
Ethernet and 24/96 ALAC
(03-Jan-2018, 20:47)f1eng Wrote: [ -> ] (21-Dec-2017, 03:07)Axel Wrote: [ -> ] (20-Dec-2017, 18:49)f1eng Wrote: [ -> ]I have the Roon trial running on an iMac streaming via Air without any problems so far, though I rarely stream for as long as 2 hours continuously. Just listening to Mahler 3 at the moment which is quite long and almost finished without glitch.
I mainly listen to CDs though.
Are you connected by Ethernet or wireless? What format and bitrate is your Mahler recording?
Sorry for delay, don't check often and never have notifications...
Ethernet and 24/96 ALAC
Hi All,
Don't forget Roon Air downsizes upper bitrates in order to avoid glitches. In these cases it is not bitperfect.
You can check it by clicking on the little "gem" which color indicates if the signal is modified or not.
Actually, Roon (with or without AIR) is configurable in terms of DSP and bit rate. However, if you have a 24/96 recording, unless you configure it via the DSP settings, it will play it back at 24/96, glitches or no glitches.