Posts: 274
Threads: 8
Joined: Nov 2016
Reputation:
9
I've loaded the new firmware with no problems so far, other than to have to annoyingly download the config file again. Should have just renamed it on the SD card but didn't.
Devialet 1000 Pro CI, Chord Signature Reference speaker cables, B&W 803 D3 speakers
Roon lifetime licence, Tidal.
Posts: 87
Threads: 13
Joined: Jun 2016
Reputation:
6
Mmmm.... 52 posts since launch on Friday and a large proportion of them refer to Devialet's terrible treatment of their customers. Come on guys, these are first world problems at the very most! Give Judith a break (and a weekend), she was on it first thing this morning. I did not get the email on Friday either so I took less than minute to click some buttons and re-register after which I loaded up the Firmware and was listening all in the time it took to make a cup of tea - not the end of the world.
Back to the important stuff - SQ has changed a bit. To me vocals are a bit more forward in the stage. However, I did change my Gigabit switch on friday as well.........
Devialet 1000 Pro; Magico A5 loudspeakers; Metronome T3a Signature CD Transport; dCS Network Bridge; Kuzma M turntable; Kuzma 4Point14 tonearm; Koetsu Sky Blue; Benzmicro LPS; Audioquest Vodka Ethernet; Transparent Reference Digital RCA-RCA; Transparent Reference XL MM2 speaker cable; Transparent Reference mains cable; PS Audio P5 PowerPlant; Artesania and Finite Elemente equipment racks
North Somerset, UK
Posts: 13
Threads: 1
Joined: Feb 2018
Reputation:
0
Successfully dowloaded and installed new firmware - which is where the joy ended. 220 no longer appears as UPnP device. Fixed IP address doesn't 'take' and unit persists with DCHP address despite reboots (of Devialet and router) and through powerups. USB connection to Auralic Aries which worked so well with DSD64 and 192 no longer works with DSD. That's the state of play at the moment - I'll take the whole system down and restart item by item when I have a few hours to see if things can be restored. David
Posts: 243
Threads: 8
Joined: Feb 2017
Reputation:
10
RC3 screwed up uPnP, which didn't connect at all, and Air, which connected and dropped continuously. Made the unit inoperable.
Restored the previous version.
250 Pro CI; Innuos Zen Mk3; Claro dual turntable (Expert Stylus Denon + OL Aladdin Mk2); RCM Sensor2; Wilson Sabrina; OePhi speaker cables; Puritan PM156 conditioner and Ultimate cables.
Posts: 57
Threads: 5
Joined: Dec 2014
Reputation:
0
(25-Mar-2018, 15:07)Jim_Anderson Wrote: happy to announce the firmware upgrade 12.2.10 corrected my issue of no analogue to right channel (in a dual D220Pro CI configuration). Now both amps are working wonderfully. Thank you Devialet
Jim
Same here! Though the actual phono inputs still don't work on either amp but if I configure the analog input adjacent, to work as a phono input - the companion unit works great - it felt good to drop a needle after a couple of weeks!
Cheers
Roon/mac mini > hqplayer > sms-200 ultra and MC-3+ USB both clocked via Mutec Ref 10 > MIT Oracle MA-X AES/EBU > D440 > Dynaudio C1 MkII via MIT Matrix HD-60
Posts: 107
Threads: 9
Joined: May 2014
Reputation:
0
Email from Judith today so i downloaded and installed the new FW when i got home.
No clicks on USB so far (with a Melco) which is good. All seems well otherwise.
James
Melco N1A > Meicord Opal > Devialet 220 Pro > Mogami 2972 > Shahinian Compass