Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turntable disappointment, what did I do wrong?
#61
(05-Feb-2021, 22:00)ogs Wrote:
(05-Feb-2021, 21:16)jonstatt Wrote: The manual says nothing but the config screen says it all. I will post pictures later but essentially the phonos have 3 settings

Turntable
Or
Line level input
Or
Spdif

So this is actually the analog input section of an Expert amp? Cartridge, line or dual spdif is just like Expert. Do you use it wired or wifi? Any pointers to the methods (protocol) used for transfer to Phantoms?
Spdif  on RCA is very interesting for example with a MiniDSP SHD Studio and/or a Mutec MC-3 +USB (if Arch transfers 24bit to Phantoms) (if Arch transfers 24bit to Phantoms)
I saw reference somewhere to the fact it is based on the Expert.

Arch has an Ethernet port but also works on WiFi or PLC

Sent from my SM-N986B using Tapatalk
Reply
#62
Got the ARCH today. Hard to test due to constant system crashing from this new firmware, but in between crashes, the ARCH sonically is exceptional. But no matter what I do, I cannot get rid of the ground noise while using a turntable (SME Model 10). It is ridiculously high. Audible even during loud music. Unfortunately, it may be going back.
Reply
#63
@invictus005
No worries , when it crashes there no humming sound (:
Reply
#64
(05-Feb-2021, 23:11)invictus005 Wrote: Got the ARCH today. Hard to test due to constant system crashing from this new firmware, but in between crashes, the ARCH sonically is exceptional. But no matter what I do, I cannot get rid of the ground noise while using a turntable (SME Model 10). It is ridiculously high. Audible even during loud music. Unfortunately, it may be going back.
No crashes here at all. Wonder why different people have such different experiences. No hum with Rega RP10. I am not grounding the arch either.

Sent from my SM-N986B using Tapatalk
Reply
#65
(05-Feb-2021, 16:45)eladeb Wrote: @jonstatt
Send up some pics of the arch setup and setting in the app.

Thanks!
Here you go...[Image: ef46efa0398395cf2bac16e546cb4e99.jpg][Image: 8a439a9cd0ce5604a2f1225ad976689c.jpg][Image: 0e86873ff8cf6931c590b4ad0796194c.jpg]

Sent from my SM-N986B using Tapatalk
Reply
#66
(06-Feb-2021, 01:04)jonstatt Wrote:
(05-Feb-2021, 16:45)eladeb Wrote: @jonstatt
Send up some pics of the arch setup and setting in the app.

Thanks!
Here you go...[Image: ef46efa0398395cf2bac16e546cb4e99.jpg][Image: 8a439a9cd0ce5604a2f1225ad976689c.jpg][Image: 0e86873ff8cf6931c590b4ad0796194c.jpg]

Sent from my SM-N986B using Tapatalk
Thank you very much for providing the Arch setup photo. I am very helpful in purchasing.

I have one more question.
Do you feel the latency when entering the line through the arch?
Deviale's homepage is unclear because it only explains that it depends on the speaker.
Thanks for the answer in advance.
Zidoo z9x 미디어 플레이어 + Shield pro-> onkyo sc5530 프로세서-> rme adi2 fs (3ea)-> 광 케이블-> Devialet golds 3 (FL, FR, C) + silvers 2 (RR, RL) / 150 인치, Optoma Hoz60 .5ch.
Reply
#67
@jonstatt
10x!
Reply
#68
(06-Feb-2021, 06:21)Lee inseok Wrote:
(06-Feb-2021, 01:04)jonstatt Wrote:
(05-Feb-2021, 16:45)eladeb Wrote: @jonstatt
Send up some pics of the arch setup and setting in the app.

Thanks!
Here you go...[Image: ef46efa0398395cf2bac16e546cb4e99.jpg][Image: 8a439a9cd0ce5604a2f1225ad976689c.jpg][Image: 0e86873ff8cf6931c590b4ad0796194c.jpg]

Sent from my SM-N986B using Tapatalk
Thank you very much for providing the Arch setup photo. I am very helpful in purchasing.

I have one more question.
Do you feel the latency when entering the line through the arch?
Deviale's homepage is unclear because it only explains that it depends on the speaker.
Thanks for the answer in advance.
My record player is currently in another room so hard to gauge but will try it on another source on Monday in the same room.

I don't think the phono stage is optimal for MC cartridges. From what I read the Expert 120/140 from which I think this is based is locked to 47k ohm loading. The zero capacitance is fine for MC but my cartridge needs 100 ohms like many MC cartridges. It might explain why it's a little bass light. I can't be sure it's the same as the expert though. Going to put it after my current phono stage instead next.

Sent from my SM-N986B using Tapatalk
Reply
#69
(06-Feb-2021, 18:21)jonstatt Wrote:
(06-Feb-2021, 06:21)Lee inseok Wrote:
(06-Feb-2021, 01:04)jonstatt Wrote: Here you go...[Image: ef46efa0398395cf2bac16e546cb4e99.jpg][Image: 8a439a9cd0ce5604a2f1225ad976689c.jpg][Image: 0e86873ff8cf6931c590b4ad0796194c.jpg]

Sent from my SM-N986B using Tapatalk
Thank you very much for providing the Arch setup photo. I am very helpful in purchasing.

I have one more question.
Do you feel the latency when entering the line through the arch?
Deviale's homepage is unclear because it only explains that it depends on the speaker.
Thanks for the answer in advance.
My record player is currently in another room so hard to gauge but will try it on another source on Monday in the same room.

I don't think the phono stage is optimal for MC cartridges. From what I read the Expert 120/140 from which I think this is based is locked to 47k ohm loading. The zero capacitance is fine for MC but my cartridge needs 100 ohms like many MC cartridges. It might explain why it's a little bass light. I can't be sure it's the same as the expert though. Going to put it after my current phono stage instead next.

Sent from my SM-N986B using Tapatalk
Hi  Mr.
I've already been very helpful to Arch's configuration screen that you sent me and purchased.  
Thank you.  
I plan to use this Arch for multi-channel.
Zidoo z9x 미디어 플레이어 + Shield pro-> onkyo sc5530 프로세서-> rme adi2 fs (3ea)-> 광 케이블-> Devialet golds 3 (FL, FR, C) + silvers 2 (RR, RL) / 150 인치, Optoma Hoz60 .5ch.
Reply
#70
Hi all, post has been quite dead for some time....any recent experience with the arch?
In particular, I'm interested in experiences from those using MC cartridges.....any comparison between going straight to the arch vs having a phono in-between?

thanks!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)