Posts: 1,251
Threads: 42
Joined: Dec 2014
Reputation:
15
(02-Aug-2015, 14:58)Will03 Wrote: Trying around 200 mill sec which is very suitable to me. Using RCA to XLR adapter with Viard silver HD coaxial link cable.
Do you really mean 200 millsec? The config is in microseconds, 0-20000uS (0-20mS) or am I totally wrong?
Speakers:TAD CE-1. Amplifier: TAD M2500mk2. Digital: TAD DA1000-TX, Innuos Statement Next-gen, Innuos PhoenixNET.
Miscellaneous: Qobuz Studio, Ansuz Mainz 8 D2, Ansuz Darkz DTC, Tubulus Argentus ethernet cable, Tubulus Concentus USB cable, Tubulus Argentus V2 XLR cable, Tubulus Argentus V3 + V3 bass, iFi Nova powercables.
Second system
Qobuz Studio -> Devialet Silver Phantom, Devialet Tree
Posts: 13
Threads: 0
Joined: Aug 2015
Reputation:
0
Still finding the best setting... trying between 100 - 300 in config
Posts: 2,443
Threads: 44
Joined: May 2014
Reputation:
84
Do you mean 100-300 microseconds? The maximum delay that can be set in the configuration is 20,000 microseconds which is 20 milliseconds.
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
Posts: 13
Threads: 0
Joined: Aug 2015
Reputation:
0
so far 300 microseconds sounds good to my system. but the real measurement is different from 300 microseconds. i think it depends on room accoustic, speakers position and companion unit delays. just pick what sounds the best with your system.
Posts: 13
Threads: 0
Joined: Aug 2015
Reputation:
0
just wonder. how come there is no d800 users complain the delay issue? is that possible devialet fixed in d800 but not d400?
Posts: 13
Threads: 0
Joined: Aug 2015
Reputation:
0
03-Aug-2015, 06:11
(This post was last modified: 03-Aug-2015, 06:15 by Will03.
Edit Reason: typo
)
the delay is 0.x ms range.
connect devialet usb input from laptop.
put the mic between the exact center of the left right speakers (you may move your speakers very close to each others). use the software CARMA by audionet or other software to check time response.
if you want to measure frequency response, put speakers back to normal position. put the mic above our seats at head level.
Posts: 1,251
Threads: 42
Joined: Dec 2014
Reputation:
15
03-Aug-2015, 10:20
(This post was last modified: 03-Aug-2015, 10:40 by octaviars.)
(03-Aug-2015, 06:11)Will03 Wrote: the delay is 0.x ms range.
connect devialet usb input from laptop.
put the mic between the exact center of the left right speakers (you may move your speakers very close to each others). use the software CARMA by audionet or other software to check time response.
if you want to measure frequency response, put speakers back to normal position. put the mic above our seats at head level.
So the delay is not 4ms it is 0.4ms that would make sense if you put in 300us in the config or am I missing something? After you have put in the 300us delay what does the measuring say the delay is? Are you using SAM aswell?
Got an answer from Devialet today but the engineer is not there, but in 3 weeks he is back and I would get a detailed answer about the delay and SAM. But they say now that SAM and delay can not be at the same time, if SAM is selected the delay automaticly goes away.
Speakers:TAD CE-1. Amplifier: TAD M2500mk2. Digital: TAD DA1000-TX, Innuos Statement Next-gen, Innuos PhoenixNET.
Miscellaneous: Qobuz Studio, Ansuz Mainz 8 D2, Ansuz Darkz DTC, Tubulus Argentus ethernet cable, Tubulus Concentus USB cable, Tubulus Argentus V2 XLR cable, Tubulus Argentus V3 + V3 bass, iFi Nova powercables.
Second system
Qobuz Studio -> Devialet Silver Phantom, Devialet Tree
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
octaviars wouldnt it be a good idea instead of putting your speakers close together etc to actually measure the time delay from the listening position?
just in case the speakers arent exactly symmetrical
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)