(10-Dec-2014, 18:58)amabrok Wrote: [ -> ] (10-Dec-2014, 14:16)Confused Wrote: [ -> ]You set one of the remote buttons to SAM on / off. (Usually losing the mute button) Select SAM on, the display shows "SAM on", while this is on the display you can then start to set the SAM % using the volume control. It will stay on SAM % controlled by the volume control until you hit the normal power on / off button to toggle out of the SAM on / off mode.
Thanks confused
Indeed I have the mute button configured to SAM on/off but it was never clear nor documented anywhere that dialing the volume knob some SAM on is displayed would control SAM %
Thanks again
An update, actually this does not appear to work anymore ! However, what does work is per @vivialet's post, i.e. Set one button to tone controls, srcroll through bass / treble through to SAM, from here the volume control sets SAM %. My apologies for the duff information earlier!
(10-Dec-2014, 13:42)Confused Wrote: [ -> ]@Mikeeo - Yes, SAM can be adjusted from 0% to 100%. It should be noted that this varies the amount of "bass boost" only, the phase correction remains fully even at SAM 0%. (or you can simply turn SAM off)
Thanks!
That is one amazing function I must say. From the speakers I've heard with SAM the quality of the bass was the least impressive effect with SAM as clarity and coherence over the whole spectrum was the real eye opener.
On Monday I will try Raidho X1 and hopefully SF Guarneri Evo.
Cheers/Mike
(10-Dec-2014, 14:16)Confused Wrote: [ -> ]You set one of the remote buttons to SAM on / off. (Usually losing the mute button) Select SAM on, the display shows "SAM on", while this is on the display you can then start to set the SAM % using the volume control. It will stay on SAM % controlled by the volume control until you hit the normal power on / off button to toggle out of the SAM on / off mode.
Where do Devialet describe this on their homepage?
/Mike
(10-Dec-2014, 21:13)Mikeeo Wrote: [ -> ] (10-Dec-2014, 14:16)Confused Wrote: [ -> ]You set one of the remote buttons to SAM on / off. (Usually losing the mute button) Select SAM on, the display shows "SAM on", while this is on the display you can then start to set the SAM % using the volume control. It will stay on SAM % controlled by the volume control until you hit the normal power on / off button to toggle out of the SAM on / off mode.
Where do Devialet describe this on their homepage?
/Mike
I need to repeat my earlier update and grovelling apology! Actually this does not appear to work anymore ! However, what does work is per @vivialet's post, i.e. Set one button to tone controls, srcroll through bass / treble through to SAM, from here the volume control sets SAM %. My apologies for the duff information earlier!
There is nothing about this on Devialet's website, in fact there is so much that the website fails to cover that it's beginning to look a bit embarrassing.
I just noticed that there is good news for Wilson Benesch owners - Vertex seems to be SAM ready now. Also Vector is going be SAM'd soon.
I hope that they would get SAM also for my Discoverys soon
(10-Dec-2014, 21:59)petrik Wrote: [ -> ]I just noticed that there is good news for Wilson Benesch owners - Vertex seems to be SAM ready now. Also Vector is going be SAM'd soon.
I hope that they would get SAM also for my Discoverys soon
Great! I've heard good reports of the Vector but will stick with my Discos for now and maybe add a Torus if and when I move them to a larger room. I'm surprised that they haven't SAMd the Square 5s as I understand that they had a pair in La Maison for some time.
I would be very interested to hear what SAM can do to a Disco. The bass is already pretty clean and tight (isobaric drivers) but who knows maybe SAM will radically improve them?
(10-Dec-2014, 22:07)PhilP Wrote: [ -> ] (10-Dec-2014, 21:59)petrik Wrote: [ -> ]I just noticed that there is good news for Wilson Benesch owners - Vertex seems to be SAM ready now. Also Vector is going be SAM'd soon.
I hope that they would get SAM also for my Discoverys soon
Great! I've heard good reports of the Vector but will stick with my Discos for now and maybe add a Torus if and when I move them to a larger room. I'm surprised that they haven't SAMd the Square 5s as I understand that they had a pair in La Maison for some time.
I would be very interested to hear what SAM can do to a Disco. The bass is already pretty clean and tight (isobaric drivers) but who knows maybe SAM will radically improve them?
Maybe hope for ACT1s then!
David
(10-Dec-2014, 22:07)PhilP Wrote: [ -> ] (10-Dec-2014, 21:59)petrik Wrote: [ -> ]I just noticed that there is good news for Wilson Benesch owners - Vertex seems to be SAM ready now. Also Vector is going be SAM'd soon.
I hope that they would get SAM also for my Discoverys soon
Great! I've heard good reports of the Vector but will stick with my Discos for now and maybe add a Torus if and when I move them to a larger room. I'm surprised that they haven't SAMd the Square 5s as I understand that they had a pair in La Maison for some time.
I would be very interested to hear what SAM can do to a Disco. The bass is already pretty clean and tight (isobaric drivers) but who knows maybe SAM will radically improve them?
Yeah exactly, it would be really interesting to hear Discoverys with SAM. I bet it would sound spectacular at least... I do have also Vertex speakers at my home (currently as surround speakers in my 5.1 set up) but I thought to try some day how much SAM affects to these speakers. So far (without SAM) I have highly preferred Discoverys over Vertex as main speakers although I do have a small listening room.
PMC Twenty 21s now on SAM list