Every thing has three sides. one positive, one negative and one weird!
Originally written by Karl Valentin (Bavarian Comedian 1882-1949)
No mention of it in the release notes.
Sent from my iPad using Tapatalk
I believe the fix is going to require a Devialet firmware or DOS update.
(25-Apr-2019, 19:36)mdconnelly Wrote: [ -> ]I believe the fix is going to require a Devialet firmware or DOS update.
I just upgraded and still have the same issue.
Not sure what kind of certification was done by Roon. They clearly make a big deal about this. All other inputs work fine with Devialet.
While it may be an issue in the Devialet firmware/OS, I also am quite surprised that this got by Roon's QA testing. They have always seemed extremely methodical when it came to allowing a product to be called "Roon Ready". Hard to see how this one slipped past them since it's pretty obvious if you're running a gigabit network.
(25-Apr-2019, 20:18)mdconnelly Wrote: [ -> ]While it may be an issue in the Devialet firmware/OS, I also am quite surprised that this got by Roon's QA testing. They have always seemed extremely methodical when it came to allowing a product to be called "Roon Ready". Hard to see how this one slipped past them since it's pretty obvious if you're running a gigabit network.
I am in my evaluation phase of roon. I had the same problem. Discussed it with the the roon support. I found a workaround to get it work:
I have now two switches in place. A TP-Link 8 Port SG108S switch where everything is connected excluding the Devialet. The TP-Link is then connected to a Linksys (configurable) switch via 1Gb Eth,. The Linksys switch is then connected to the Devialet.
All Ethernet Adapters in my network are Intel and all have enabled Auto Negotiation.
What works:
I configured the port of my Linksys switch connected to the Devialet in the following way:
Auto Negotiation=Disable
Port Speed = [b]100[/b]M
Flow Control = Enabled
What does not work:
i)
Auto Negotiation=Enable
Port Speed = [b]100[/b]M
Flow Control = Disabled
ii)
Auto Negotiation=Disable
Port Speed = [b]1000[/b]M
Flow Control = Enabled
The Devialet has a problem with Auto Negotiation (could work ->then it works and people have not the problem) and with 1 Gb Ethernet.
